thechief86
NAXJA Forum User
- Location
- White House, TN
Hey! Does a 91 with the 4.0, ax15, np231 and front CAD have a 23 spline input transfer case? I want to to a hack and tap on a 96 and newer case and put it in if I can....
Weekend is over...what did you get done?
- Thread starter Mr.Shrek
- Start date
- Location
- Rainy side of Washington
All AX15s have a 23 spline output shaft, so it should. All 91s and later should have a 23 spline even with an AW4 as far as I know, too. Mine had a 27 spline AW4, but that's because it was 2wd :gag:
shortxjdoug
NAXJA Forum User
- Location
- Chattanooga tn
the judge is a sweet gun....i shot .45 colts out of one once. id hate to carry one though
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
The .410 shells have a wee bit more omph to em.
hadfield4wd
NAXJA Forum User
- Location
- Roanoke, VA
I'm sure since I don't have a butt I'd need to wear suspenders if I carried it.
thechief86
NAXJA Forum User
- Location
- White House, TN
Thanks! This will make my life a little easier....
- Location
- on the beach in Ocean View, VA
Driving a mustang and leaving it in town?
naah-- that's crap.... I was more than willing to take it out on the beach and park it by you guys. I was told it would never make it (probably true..) and the y'all were too sleepy to wait up for me to get there.
I still might be rocking a 2wd car this year, but at least I'll be able to bring people that might have a good time..... I had a great time last time, F.W.I.W.:smootch:
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
I had a muffler put on April's Cherokee today...
She went and picked it up and left and didn't pay much attention to what they did.
When I got home I checked it out and found this bull shit.
It will be going right back up there tomorrow...
The tail pipe isn't a big deal, I can chop it off shorter, but the muffler is welded in there at a 10-15* angle in comparison to the rest of the exhaust up and down and side to side. I should have just made time to do it myself.
My 8 year old daughter could have done a better job than that! That's pathetic. How can you possibly expect to keep business by doing this half assed work?
She went and picked it up and left and didn't pay much attention to what they did.
When I got home I checked it out and found this bull shit.
It will be going right back up there tomorrow...
The tail pipe isn't a big deal, I can chop it off shorter, but the muffler is welded in there at a 10-15* angle in comparison to the rest of the exhaust up and down and side to side. I should have just made time to do it myself.
My 8 year old daughter could have done a better job than that! That's pathetic. How can you possibly expect to keep business by doing this half assed work?
shortxjdoug
NAXJA Forum User
- Location
- Chattanooga tn
As I said on Facebook....that's bush league right there....
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
I'm really suprised the owner let it leave like that. He usually does much better... He must not have looked at it.
sam24th
NAXJA Forum User
- Location
- charlotte NC
Welp I broke down and ordered a new real welder instead of using the 90 dollar Harbor freight POS I have. Got myself a Hobart 140 Handler with gas hookup. Gonna start to try to practice on it so I can get better.
- Location
- Roanoke VA
Wow, just WOW! That is some half a** work there. I bet that installer is looking for a new job tomorrow. If he worked for me he would be.
I had a muffler put on April's Cherokee today...
She went and picked it up and left and didn't pay much attention to what they did.
When I got home I checked it out and found this bull shit.
It will be going right back up there tomorrow...
The tail pipe isn't a big deal, I can chop it off shorter, but the muffler is welded in there at a 10-15* angle in comparison to the rest of the exhaust up and down and side to side. I should have just made time to do it myself.
My 8 year old daughter could have done a better job than that! That's pathetic. How can you possibly expect to keep business by doing this half assed work?
resq229
NAXJA Forum User
- Location
- Waynesville, NC
Got the new Cragar V5's and new KM2's ready to go.
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
Nice!
- Location
- Harrisburg, NC
Got the new Cragar V5's and new KM2's ready to go.
Looking good! I had to try real hard not to drool over them on Saturday...
resq229
NAXJA Forum User
- Location
- Waynesville, NC
LOL, yup i noticed, but i let you in on the secret for the best prices.
Got all the lift stuff just waiting on my drop brackets and the fun begins, you guys are more than welcome to come help if you want.
resq229
NAXJA Forum User
- Location
- Waynesville, NC
Did the installer actually weld the muffler on or did he glue it on with JB weld? those welds look terrible. id be demanding he fix that right.
sam24th
NAXJA Forum User
- Location
- charlotte NC
Got the new Cragar V5's and new KM2's ready to go.
gah! I want some new tires..... What size are those?
Also today I started parting some of the parts out on the XJ. I decided the XJ is staying, but some of the parts arent. Im gonna park the XJ in the garage and start fixing her up.
arty:resq229
NAXJA Forum User
- Location
- Waynesville, NC
they are 35x12.5-15's
- Location
- Harrisburg, NC
Yup. And just so you know, I didn't crash on the way home....so the cylinder head is still in one piece.
I did forget it was back there on my way to Brevard....276 is a fun little road in that car, except when a 4.0 head is rolling around in the back....lol
