THe NAC Lots-O-BFG KO2 Thread

[5spd_xj]

Re: THe NAC Lots-O-Post Thread

TEXT TEXT TEXT!!!!!!!!!!

 

[Dundy]

Re: THe NAC Lots-O-Post Thread

There's not something different about the 35 yoke?

From everything I remember the 30/44/dana300/etc are all the same but the 35 doesn't interchange.

(inside reference: Matt Gaskins having to punch broken strap bolts out of his rear 35 yoke in the Woodpecker after breaking them in the Backyard in '07 because everyone only had 30/44 yokes available)

AFAIK No.

J0935685
Spline Count: 26
Seal Surface Diameter: 1.552"
Seal Surface Height: .662"
Designed for a 1310 U-Joint
Overall Height: 3"
Spline Length: 1.552"
Slinger Diameter: 4.150"

It's at my desk now. Let me know if you need any other measurements.

 

[Dundy]

Re: THe NAC Lots-O-Post Thread

If it behaves itself, funny I was about to text you about that.

Yo Rob, what did you use for a rear brake hose to the axle?

 

[vetteboy]

Re: THe NAC Lots-O-Post Thread

Dana 35's have a 1.842" diameter through the seal.

30/44/300/etc use the 1.552.

Not sure what else changes though.

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

Yo Rob, what did you use for a rear brake hose to the axle?

84ish dodge w250, same for the frt to. With dodge lines at the calipers

 

[Dundy]

Re: THe NAC Lots-O-Post Thread

Dana 35's have a 1.842" diameter through the seal.

30/44/300/etc use the 1.552.

Not sure what else changes though.

Makes sense. We do include a seal with our D35-YOKE-UBK. Spicer P/N: 40554

 

[billyjp2]

Re: THe NAC Lots-O-Post Thread

So what do you guys think of this? Gonna cut the soft lines on both sides of the hard lines, gonna use some hose barbs and some rubber hose to replace just the hard line section, should work mint, plus it ain't like this this flows a lot of fuel

Do it, should be no problem at all. Very little pressure in those lines.

 

[billyjp2]

Re: THe NAC Lots-O-Post Thread

Use the pinch clamps if you wanna get fancy

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

Zip ties work?

 

[kastein]

Re: THe NAC Lots-O-Post Thread

Use power steering fluid or ATF for brake fluid while you are at it, I hear it works great

 

[billyjp2]

Re: THe NAC Lots-O-Post Thread

Absolutely

 

[MagicNelson]

THe NAC Lots-O-Post Thread

I need to buy a tranny cooler before NACFest. Any recommendations?

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

I need to buy a tranny cooler before NACFest. Any recommendations?

AX15

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

I need to buy a tranny cooler before NACFest. Any recommendations?

Go the JY and grab one off a Ford Explorer.

Usually dirt cheap, have 3/8" hose barbs right on them, and work very well.

 

[5spd_xj]

Re: THe NAC Lots-O-Post Thread

AX15s don't need hose barbs, and they never came on Exploders you goof

:twak:

 

[Dundy]

Re: THe NAC Lots-O-Post Thread

I need to buy a tranny cooler before NACFest. Any recommendations?

Go the JY and grab one off a Ford Explorer.

Usually dirt cheap, have 3/8" hose barbs right on them, and work very well.

x2. That's what I used. I just cut and flared the tranny lines and ran hose to the cooler. I mounted the cooler with the zip-tie style mounts.

https://www.etrailer.com/Accessories-and-Parts/Derale/D13001.html

 

[XJLI]

THe NAC Lots-O-Post Thread

Just make sure your inlet is the lower one, it doesn't work as well with the fluid falling down through the cooler

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Just make sure your inlet is the lower one, it doesn't work as well with the fluid falling down through the cooler

Both barbs are on the bottom on the Explorer ones.

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

AX15s don't need hose barbs, and they never came on Exploders you goof

:twak:

Eh, some people just don't want the best.

 

[RCman]

Re: THe NAC Lots-O-Post Thread

Go the JY and grab one off a Ford Explorer.

Usually dirt cheap, have 3/8" hose barbs right on them, and work very well.

Just don't have this guy ^ get it for you, it'll leak.

Use the explorer cooler or get one of these:
http://www.summitracing.com/parts/bmm-70268
http://www.summitracing.com/search/brand/b-m/product-line/b-m-supercooler-oil-coolers