Toter home build

...figured you'd have macgyver season 1 playing instead of star trek.

That was the first dvd I grabbed to make sure the dvd player worked...

mac 'I do have all 7 seasons' gyvr
 
sat down and made a list of everything I need to do to get the camper portion done. It is alot of little things, but not too time consuming. I am gonna just have to work on knocking them out 1 at a time. I still have to figure out how I want to do the dining area once I finish out the rear bunk. I plan to use my table out of my old slide in so basically I just have to design my seating for it.
 
you keeping the uhaul dome lights in the back or converting those to LED panels?

I can save the mounts tat go between the roof stringers as well.
 
you keeping the uhaul dome lights in the back or converting those to LED panels?

I can save the mounts tat go between the roof stringers as well.

I have my 2 but have not decided on what I want to do in the garage yet, getting 12 volt back there is enough to do even after everything ese is finished, Hang on to them as I can use them
 
I have today off so I am planning to start knocking out some of the small stuff and see how much shorter I can get my list today. I picked up a bunch of stuff yesterday so I should not need to run after anything. I am hoping to finish out all my outlets, 12 volt and as much of the plumbing as I can. If things go right I will have a fully operating kitchen by this afternoon.
 
the ones up by the roof on the sides, ya know, clearance lights, there is one on eack corner cap and one about half way down on each side at the top
 
Those clearance light lenses should be available at any truck stop or NAPA store, if you get me a pic of the lenses you need I can dig you up NAPA part numbers.
 
the ones up by the roof on the sides, ya know, clearance lights, there is one on eack corner cap and one about half way down on each side at the top

well, there's some on the back too.

I'll probably be keeping the ones from the back, but I won't need the ones on the front or side.
 
well, there's some on the back too.

I'll probably be keeping the ones from the back, but I won't need the ones on the front or side.

My front and rear centers are fine, I just need the corner and side lens covers, they got knocked off when I did the roof coating and I forgot and mowed them LOL
 
I never posted up any pics of the propane tank storage so here they are

Toterhome132.jpg

Toterhome133.jpg

Toterhome134.jpg


The last pic shows where it is in the cabinet under the ice box, I plan to get all the 12 volt wiring finished out tomorrow, right now it is just hooked up temp for testing. I need to get it all cleaned up and out of the way still. Gonna see if I can find a simular strip to the fuse panel to attatch all the grounds the same way for a nice neat organized looking panel
 
just got back from picking up all my wire connector ends, now I am just waiting for it to warm up out there, a little chilli to be fumbling with tiny little things right now for me. I am hoping to have all my 12 volt done today except for mounting the rear bed light and garage lights. I also want to finish getting all my 110 wire in place. If I can get all that done in time I will also try to finish off my plubing today also. Gotta wait till payday to pick up lumber and stuff to finish the bunk so I am trying to knock out all the little stuff for now to kill time.
 
havent seen glass fuses in a while lol
looks good dude. you gunna get any solar pannels for it? i got a harbor freight 45w set for my van, does a good job of keeping the batteries topped off.
 
Back
Top