Emergency help needed !!!!!

crazy4mopar

NAXJA Forum User
Location
Poway Ca,
My name is Pam I am Lees wife. I just got an ememrgency call from him . He is at ford ice and he needs a drivers side axle assembly. He needs to borrow or buy cheap so he can get his Jeep home. If you have any information on where we can get one or if you have one PLEASE call me at 530 668-8929 or respond to this post .

Thank you all for your Help
Pam
 
It sounds like its a dana 30 front drivers side. I called Pam, and let her know she was welcome to borrow my spare. Elk Grove is kind of out of the way so if any of you closer, or on the way folks have any chime in.
 
Yessss

This is EXACTLY what is great about NAXJA: Folks helping folks in need out of a jam.

Good Job Sierra folks! Y'all make me proud to know ya.
:)
 
Hi all
Lee called this morning and wanted me to thank all of you for your help . We did locate a borrow part to help get him home and we appreciate it. The part will be on the way to him as soon as he can tell me exactly where to drop it off.

You guys are great!

Pam
 
I'm back!!!!!!!!! Gary E is the man!! thanks for the axle I didn't use it but I was greatful knowing it was on it's way up to me just incase!

That was a the wheeling trip from hell. We were supposed to meet up at 4pm fri to get going, we didn't leave until after 7.
we set up camp at about 1 am.
Sat. We got up at 11am didn't get going until 2pm! wheeled for about an hour I snapped the front U joint :mad: , no big deal...I thought. Pulled it apart the and found the U joint tweaked the axle end :mad: :eek: . so for the next 4 hours or so be beat, banged and pryed the axle almost straight. When we started putting the U joint back togather the cap broke :anon: so for the next hour or so I sifted thru the dirt finding all the needles to the old cap to put on the new U joint:mad: We put the new/old cap on the new joint, tapped it in lightly ...it dropped right in....So I figured we could apply the CRASH method and weld the u joint on to the cap since we had a 24 volt wirefeed welder. So we get the wirefeed out would'nt you know we oly had one set of jumper cables:mad:. So he put a 12V bunny turd weld on it:rolleyes:
By now it's about 7:30 we hit winchhill 1 at about 8:00 I decided to take the bypass....and got stuck for about an hour because I got wedged between 2 rocks, some hi-lifting and rock stacking got me clear. It's now about 9:30. The Nissan that was with us also took the bypass and got stuck!!, more hi-lifting and rock stacking got him up to the top of the bypass.... almost his front drive line pops apart.about 10:45 we get going and camped at the second water crossing and :party: until about 3am. noon rolls around on sunday we get going about 30 min later we are at Winch hill 2 but nobody tells me ang I get to the top and get stuck for about 1 1/2 hours O, while I was getting strapped out my junk falls on it's side :cool: damage, bottom rear quarter thanks to the bumper it held me on a rock. the nissan got stuck also, another 2 hours gettin him off the bypass, he had a monster rock under him. 5pm the Sammi blows the rear driveline U-joint. 6pm the 78 bronco blows a U-joint strap. 6:30 the Toyota blows a motor mount, right at at the Cisco grove water crossing the 68 bronco blows the starter. At 6:30 we got a hold of a friend in Sacramento to run up some parts, It's his birthday so calls his family and canceled his party :( . he gets up to the campgrounds in his Toyota camary and gets lost. The toyata found him at about 11:30 sleeping on the side of the road. He came back with the parts everyone got their junk fixed and we hit the road at about 1 am and got home at 3am. I'm going back to sleep now:wow:
 
Dear gawd.

Fordyce tried to eat my rig in May, so I know the feeling.

CRASH
 
Gary
I called your house and got a fax machine. I'm on the way to 4 wheel parts in sac to replace the blown KM tire, give me a call at 747-2775 and I'll bring the axle over
Thank again :D
 
Back
Top