BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Need to order some rubber bullets.
before the crawl my junk needs.....
- Thread starter shortxjdoug
- Start date
- Location
- Columbus, In
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
Haha. I'll be packin the .380 all I gotta do is hit someone's knee and I'm home free.
- Location
- Southwest IN
I'm thinking 12ga mount in the Jeep 
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
Well, my new year's resolution is to get everything I've bought for the heep actually installed on the heep before July 4th.
1. Front, mid and rear stiffeners (will trade spare bedroom 30 minutes from the ocean for install *Doug* )
2. Front air bumps
3. Artec high steer arms and double shear brackets
4. Fab drag link and tie rod for new arms
5. D300 install with twin sticks
6. Rear bumper w/tire carrier fab and install
7. C-pillar cage fab
8. Tube rocker replacement
9. Cage feet install with rocker/frame reinforcement
10. Rear axle truss install
11. Slip/twist traction bar install
12. Front CTM rebuild
13. Rebuild long arm joints
14. Rebuild front/rear driveshafts
15. Replace rear D60 pinion seal/nut
16. Finish led rock lights
17. Install lower radiator hose w/spring and solve highway overheating problem
18. Refinish front bumper and light mounts
19. Design/fabricate/install harnesses for the kids in the bench seat
20. Install cage padding
I'm sure there's something else in the garage I'm forgetting, but that is a pretty good start.
1. Front, mid and rear stiffeners (will trade spare bedroom 30 minutes from the ocean for install *Doug* )
2. Front air bumps
3. Artec high steer arms and double shear brackets
4. Fab drag link and tie rod for new arms
5. D300 install with twin sticks
6. Rear bumper w/tire carrier fab and install
7. C-pillar cage fab
8. Tube rocker replacement
9. Cage feet install with rocker/frame reinforcement
10. Rear axle truss install
11. Slip/twist traction bar install
12. Front CTM rebuild
13. Rebuild long arm joints
14. Rebuild front/rear driveshafts
15. Replace rear D60 pinion seal/nut
16. Finish led rock lights
17. Install lower radiator hose w/spring and solve highway overheating problem
18. Refinish front bumper and light mounts
19. Design/fabricate/install harnesses for the kids in the bench seat
20. Install cage padding
I'm sure there's something else in the garage I'm forgetting, but that is a pretty good start.
Lowrange2
NAXJA Forum User
- Location
- Abbeville, SC
Wow, I don't feel so bad about my list now.
- Location
- NE Indiana
I hope this is all done the week before the crawl...
mac 'or i'll be helping wrench
' gyvr
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
I hope this is all done the week before the crawl...
mac 'or i'll be helping wrench
I think it's going to take some vacation time while the kids go to school and the wife works.
red 'cleaning a spot in the garage for the first time in 3 years' heep
shortxjdoug
NAXJA Forum User
- Location
- Chattanooga tn
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
I'm allowed to work on it but I'm not allowed to wheel with you?
I haven't experienced any cosmic catastrophic events in the garage yet
It all started with your damn spark plugs.
- Location
- Middle Tennessee
Done! Also fixed the passenger side door lock and installed a mirror. YES!
Mark did most of the work. I'm just the tool flunky, gofer, etc.
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
Where did your bumper come from?
- Location
- Middle Tennessee
I bought it from Stump when his 1996 XJ got totalled.
The Hard Struggler
NAXJA Forum User
- Location
- Atlanta GA.
It looks like Floyd the Struggle Wagon is going under the knife again very soon. Just ordered some stuff for a double triangulated four link in the rear.
Maybe a full tilt big boy stroker if my money tree keeps producing.
Maybe a full tilt big boy stroker if my money tree keeps producing.
- Location
- Camden, SC
Nice.
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
I have a 4.7 stroker that's needs a little work (cam needs replaced but I have a cam kit from 505 performance to go with it) that I'm not using. I can bring it to the crawl. With my 5.9 I don't have a use for it anymore.
shortxjdoug
NAXJA Forum User
- Location
- Chattanooga tn
- Location
- Camden, SC
I haven't tested it yet but I'm thinking I have low compression in #6 so I was going to ask the same thing.
