jonathanc
NAXJA Forum User
- Location
- Surrey, BC
My father has been spying this 96 Cherokee. Seems like a good deal for the amount of work put into it, but I wonder if it might suffer from death wobble (5" lift without longarms ?)
Here is the description:
http://monkeycage.island4x4.com/showthread.php?t=39841 has pictures of the buildup and exoskeleton
He wants $5000 canadian for it.
Hrmm, just read about it a little more. Looks like he made his own control arms that are 2" longer to center the front diff.
Here is the description:
96 XJ 4.0l straight 6, cold air intake and performance exhaust, has additional electric cooling fan, runs great,
auto trans works perfect, rebuilt np242 transfer case with SYE, tom woods driveshafts front and rear with new rear u-joint and spare u-joint, dana 30 front open with larger shafts and spare u-joint,
dana 44 rear spooled with new pinion yoke and seal and new axle seal, brand new 35 13.50 r15 toyo open country M/T(only been run a few times),
approx 5 inches of lift, custom arms built by previous owner, modified BDS track bar with new tie rod end, new tie rod sleeve,
champion c95385 winch(9500 lbs) mounted on a hitch receiver, full exo cage made out of 1.5", 1/8" wall square tubing, comes with extra metal, i was planning on beefing it up in a few places but didnt get around to it, super strong skid plate for t-case, skid plate for gas tank, fresh oil in the diffs, t-case and engine,
rockford cd player with small speakers under the seats
http://monkeycage.island4x4.com/showthread.php?t=39841 has pictures of the buildup and exoskeleton
He wants $5000 canadian for it.
Hrmm, just read about it a little more. Looks like he made his own control arms that are 2" longer to center the front diff.
Last edited: