• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Weekend is over...what did you get done?

Well probably be going with the local crew, it's a pretty good time. We could do the the long ride out to the flats. It's not too technical, perfect for the mj.

I've got trails for everything... Ugly truck don't care

Its open/open but the main wheeling drawback is the tires right now. Low tread 265/75/16 MTRs, fricking E load range. Low tread, not very big, none-flexing sidewalls. Some long drive sight-seeing trail riding will probably be best if I make it.
 
Who all is coming to the world of wheels show in Chattanooga this Saturday? The blown 6.0 one ton jk that Tyler built will be on display. We
Are driving up Saturday and plan on hanging out most of the day and graving lunch or dinner with everyone.
 
Who all is coming to the world of wheels show in Chattanooga this Saturday? The blown 6.0 one ton jk that Tyler built will be on display. We
Are driving up Saturday and plan on hanging out most of the day and graving lunch or dinner with everyone.

If it wasn't a 10 hour drive I would be there!
 
Thanks for all the kind words guys. I'm doing a lot better now. What really happened is Betty got tired of my aggressive lovin' and decided to turn it around on me. She's good to go other than needing a 75 cent fitting & 5 minutes worth of labor... I need multiple doctor visits & numerous weeks of heal time.

I went to a minute clinic on New Years day & the Dr there took X rays & determined I had fractured my right radius next to where it meets my wrist bones. He put me in this huge temporary cast & then advised me to go see an orthopedic doctor about it. This morning was the first available appointment so I was there at 7:00 am. The specialist looked at my x rays & decided that the "crack" we were seeing was more than likely just a growth plate & in his opinion its not broken. He also noticed that 2 of the 8 bones in my wrists had fused or grew with a defect when I was born. So I have 1 big bone instead of 2 smaller ones leaving me with 7 bones in each wrist instead of 8. Both wrists are this way.

So my official injuries are: minor sprain of left wrist (feeling better every day), major sprain of right wrist, bruised right shoulder, broken left pinky toe, broken left big toe, and a busted face. All of this happened with one fall.

I'm lucky I didn't get run over. It could've been a very bad situation as I was on the trail by myself. I realized I had made a horrible mistake as soon as I turned the key off. But at least I dont have to worry about fixing the jeep though. Hopefully I'll make a speedy recovery as I have lots of work to do.

Getting the display stuff ready for Judy's debut at the world of wheels next weekend is going to be tricky.

Glad to hear you are ok.... You do realize that you are acting like me now..... :conceited :roll:

Who all is coming to the world of wheels show in Chattanooga this Saturday? The blown 6.0 one ton jk that Tyler built will be on display. We
Are driving up Saturday and plan on hanging out most of the day and graving lunch or dinner with everyone.

Man if I had the CC paid off and no plans I'd come up in the Diesel.
 
Took a little trip up to my cousin's cabin this weekend. Most of these pictures are blurry junk so I'm sorry.

Drove through some clouds.
20140105_112904_zps3564724f.jpg


20140105_120859_zpsa67a14b6.jpg


20140105_120505_zps0b4843f8.jpg


Got a little slop on the tires after it rained all Sunday morning...
20140105_121025_zpsf35c5c75.jpg
 
7uryhuhe.jpg


Made some more progress on the intake swap in my buddy's jeep. It's should be a fun jeep considering its a 4.7 built with pretty much all 505 performance stuff.
 
7uryhuhe.jpg


Made some more progress on the intake swap in my buddy's jeep. It's should be a fun jeep considering its a 4.7 built with pretty much all 505 performance stuff.


That's how I feed the red rocket. K&N drop in, Bored TB, 99 intake manifold, mustang 24lb injectors.
 
Made some more progress on the intake swap in my buddy's jeep. It's should be a fun jeep considering its a 4.7 built with pretty much all 505 performance stuff.


My '91 had a 4.6 in it, funny thing was everyone wanted to see the engine when they learned it was stroked. They were disappointed when it still looked like a 4.0L :D
 
Started cleaning up the harness to the rear and putting a header panel on
also worked on the front bumper .Show Stopper total cost in build $12.00
 
Here is a teaser pic of what Mark and I worked on today.

1517703_10201755707756818_1231657120_n.jpg


1517703_10201755707756818_1231657120_n.jpg
 
Rode out to Garner yesterday morning with joshooha to pick up a set of 33's that I got from RedHeep, and have a quick lunch. Got caught in a pretty nasty storm on the trip back home yesterday afternoon that did a lot of damage not far from where it tried to blow us off the road, but still got home with enough time to mount them on my wheels and get them balanced. Haven't thrown them on the Jeep yet, maybe one evening this week after work.

Thanks to both Josh's for the help yesterday!

1546229_10101160309986647_1482569338_n.jpg



Knowing people with MJ's comes in handy :D
 
87 Renix jeep passes smog after new cat,all new sensors,welded up exh manifold,new gasket
Guy at smog place was impressed it passed emissions of a new car.after being tagged
As a gross polluter..bu
sy weekend ...im stoked!
 
Rode out to Garner yesterday morning with joshooha to pick up a set of 33's that I got from RedHeep, and have a quick lunch. Got caught in a pretty nasty storm on the trip back home yesterday afternoon that did a lot of damage not far from where it tried to blow us off the road, but still got home with enough time to mount them on my wheels and get them balanced. Haven't thrown them on the Jeep yet, maybe one evening this week after work.

Thanks to both Josh's for the help yesterday!

1546229_10101160309986647_1482569338_n.jpg



Knowing people with MJ's comes in handy :D

You could have put all that in the back seat of the Kia.
 
I see a cage match coming on here........The Hoedown in Harlan.
 
I see a cage match coming on here........The Hoedown in Harlan.


That would mean Andy would actually have to show up.....we all know he won't! :D
 
Back
Top