Tie rod end identification

tanjeep1999

NAXJA Forum User
Hey everyone, long time follower. First time poster! I need new tie rod ends, both sides are the same. I know they are offset but I am having trouble figuring out which ones I need to order. Mine are bad. Any help would be appreciated. I am capable of replacing them myself, I just need help with I.D.







tie-rod-end.jpg
 
awesome, thank you so much. i will check!

It looks like you have a WJ knuckle swap on your XJ. Typically people will use the GM tie rod ends on the new steering linkage. It look like a similar set up on my 99XJ. I did the same knuckle swap and those offset TRE's look like what I used. I can't be 100% sure from the pictures, but I think those are them.

Keep us posted as to what you find.
 
I used a GM set from Ruff Stuff about 10 years back. The covers are still good. I used a set from a vendor off of EBay. They started cracking with in a year or two. So, get GMs. And the 1-Ton GM cross over steering is so nice. I use a steering stabilizer on mine. Yet, there isn't really a need to. I have run without one just fine.
 
Back
Top