OutkastBoss
NAXJA Forum User
- Location
- Saint louis
these are the poly mounts, for anyone interested.
can't receive Pms from my cell and haven't been home yet..
I won't use them as I don't want poly.
these are the poly mounts, for anyone interested.
Dan, I'll take two sets.
I have one that is wood grain. $20 sound alright?
looking for a receiver hitch for my buddy to throw on his stocker he thinks hes bringin without wheeling (trying to convince him to run green) if anyone has a lead
These are the resisters I was talking about earlier. Free to whoever needs them for led turn signals.
![]()
I could use these. I plan on doing led when I get my 1/4 guards with built in light boxes on
I've got a used pair of 3" add a leafs that are probably 2" now. All you need then are a pair of 2" spacers for the front and wala! You have a small lift!
I don't have the spacers anymore. Sold them a couple of years ago. They're 30 or 40 bucks new but someone might have a pair laying around.
$20 for the springs if you're interested.
rough country wants 28.95 plus 8.95 for shipping plus tax. 20 sound good? or a fifth of jim beam red stag![]()
'98 4.0L motor. Motor has about 130,000 miles on it. At about 120,000 miles I replaced the oil pump and put a high volume pump in it. At about 130,000 miles the input of that new oil pump broke while driving. I drove it about 1 mile with no oil pressure. Once home I replaced the oil pump with a standard volume pump, and also replaced the timing chain. I couldn't get the motor to run after that. When I had the Pan off the motor still seemed to be in good shape. The cam still had oil dripping off of it and none of the lobes were worn. I actually believe it to still be in usable condition but I have no way of confirming it because I didn't run it again. I also have no clue as to why it wouldn't start when I replaced the oil pump and timing chain. I'm willing to bring it along and someone can have it for the price of a few beers around the camp fire. If nothing else it has a brand new oil pump. The water pump is also fairly new. IIRC though I put the original chain back into the motor in an effort to get it to run. This thing could either be rebuilt, or parts used from it, or someone could actually install it and see if it could be used as is.
If interested in having me bring any of this make me an offer and we'll see what we can work out.
85XJWoody (Kim) has one he was going to give to me, I don't need it now. PM him and get the nut strips that would be needed to install it.
Cool thanks for the Lead ill send that Pm now ..
Also I Still have the 2 CB's and 2 antennas free to any member that needs one.
And dirt cheap for a non member (make offer)
Sign me up for one of those antennas just incase I don't get one ahead of time.