The Stupidist Jeep on the Planet

[Vanimal]

not too bad, so about 360-400 in materials for me. guess it's time to throw some pennies in the pickle jar.

 

[foxwar71]

Needs less sheetmetaal

I like the idea for the spreader bar between rocker legs for the B pillar base, I may have to copy it.

 

[cmelo]

Remember, when you're done with your cage and its all welded up nice. Go over all your welds one more time, with no shielding gas. Get em all nice and covered in booger welds. That way no one will think you ******d out and was afraid to roll again without a decent cage. Then when you roll again, on purpose, in typical Rob fashion, you still look like you're a friggen lunatic.

 

[ROBZ95Xj]

Remember, when you're done with your cage and its all welded up nice. Go over all your welds one more time, with no shielding gas. Get em all nice and covered in booger welds. That way no one will think you ******d out and was afraid to roll again without a decent cage. Then when you roll again, on purpose, in typical Rob fashion, you still look like you're a friggen lunatic.

how the **** is it that i know someone who is so ****ing itelligent? my mind is so blown away that im scared right now

 

[cmelo]

how the **** is it that i know someone who is so ****ing itelligent? my mind is so blown away that im scared right now

I gotcho back dawg

 

[5spd_xj]

or you could just do it my way and make the welds look awful right off the bat :thumbup:

 

[ROBZ95Xj]

or you could just do it my way and make the welds look awful right off the bat :thumbup:

where do ya think i learned how to make awsome welds, obviously carmelo has never seen my welds

 

[ROBZ95Xj]

got both b pilliars tacked in place, along with the drivers side d pilliar and a brace, hope to get the pass side d pilliar and brace in tomorow

 

[nhrocker]

I now log in just to see your pretty pictures bigger than on my phone...

:cheers:

 

[ROBZ95Xj]

made another cowl bar, along with harness bar, and x bar, everything is also welded up, all i got left is a couple of harness mounts and gussets

 

[MoparManiac]

Kick ass.

 

[ROBZ95Xj]

cage is 100%welded and painted

also made a mount for my hi lift, its a highly coplicated combonation of 1/2" bolts welded to the cage with wing nuts

took the jeep for a ride, the cyclist behind me failed to see my brake lights

 

[RCman]

Looking good!

I laughed when I got that picture message. :laugh:

 

[twodoorXJ]

Thats awesome.

 

[ROBZ95Xj]

all put back together again, goin wheelin this weekend for the first time with a cage, should be interesting, cant wait

 

[ROBZ95Xj]

wasnt able to test the cage, i just slid down shit sideways, the cog should go up a little in the next few weeks, as it was the last trip for the 38's

 

[beakie]

wasnt able to test the cage, i just slid down shit sideways, the cog should go up a little in the next few weeks, as it was the last trip for the 38's

this some kind of weird jeep porn?

or did someone take the "you can kiss my a$$" idea a little too far?

 

[RCman]

this some kind of weird jeep porn?

or did someone take the "you can kiss my a$$" idea a little too far?

Nothing more than a stupid driver (in both Jeeps).
:laugh:

 

[ROBZ95Xj]

Nothing more than a stupid driver (in both Jeeps).
:laugh:

who you callin stupid, stupid:wstupid:

 

[ROBZ95Xj]

borrowed a couple 42" Rockers from a friend, looks like the Jeep will be loosing some sheet metal tomorow