THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

oh lol. That's dumb
 
Re: THe NAC Lots-O-Post Thread

I just had some kid grilling me while I was in Wendy's. I saw him leave and get into a Cherokee, then I remembered I was wear my NAXJA hat and hoodie. NAC REPRESENT!!
 
Re: THe NAC Lots-O-Post Thread

dukie564 said:
Anyone here have experience selling comics and getting them appraised?

Came into possession of a LARGE box of bronze and modern age comics in excellent condition (about 250) - mostly The Incredible Hulk and Captain America. Looking to see what their value is. I started cataloging them and taking a shot at grading them already.
Click to expand...

buy a $20 program that updates prices automatically, give you a good idea of what to ask for from a buyer
 
Re: THe NAC Lots-O-Post Thread

dukie564 said:
Anyone here have experience selling comics and getting them appraised?

Came into possession of a LARGE box of bronze and modern age comics in excellent condition (about 250) - mostly The Incredible Hulk and Captain America. Looking to see what their value is. I started cataloging them and taking a shot at grading them already.
Click to expand...

Just throw them out
 
Re: THe NAC Lots-O-Post Thread

I found a bunch of old comic books in a junk car once. They were super old, maybe worth something. But, comics book are gay so I threw them back in the trunk and poured gasoline on top of them.
 
Re: THe NAC Lots-O-Post Thread

cmelo said:
I found a bunch of old comic books in a junk car once. They were super old, maybe worth something. But, comics book are gay so I threw them back in the trunk and poured gasoline on top of them.
Click to expand...

Did you at least take the alternator? What if it was a 120a?
 
Re: THe NAC Lots-O-Post Thread

2 things I just saw on modern marvels that we need at the next NAC event.

First is the mobility denial system. Its some lube shit you sprat with a hose that turns any surface more slippy than ice.

And second is the puke light. Some led thing that makes you puke.
 
Re: THe NAC Lots-O-Post Thread

chedisme said:
2 things I just saw on modern marvels that we need at the next NAC event.

First is the mobility denial system. Its some lube shit you sprat with a hose that turns any surface more slippy than ice.

And second is the puke light. Some led thing that makes you puke.
Click to expand...

i saw that too.

1- mobility denial system my ass. I'm just gonna slip-n-slide that shit over to the other side

2- i had to look up that puke light thing. That does NOT sound fun...
The LED Incapacitator is a weapon designed like a flashlight. It emits an extremely bright, rapid, and well-focused series of 'differently-colored random pulses.' Before the human eyes can focus in on one frequency, another frequency comes on, causing intracranial pressure, which results in cluster headaches, nausea, vomiting, disorientation, irritability, and visual impairment
Click to expand...
So it tries to make your head explode...awesome
 
Re: THe NAC Lots-O-Post Thread

[chain saw question]
My girlfriend's father recently gave me a barely used McCullough Maccat 35cc 16" bar saw. I know it's nothing special, but I figured hey, it's free, and it's my first saw and it will only see intermittent use. I probably don't need the 80cc and 24" bar Stihl or Husqvarna that a lot of people seem to lust after.

As with any free tool, it's not free. It doesn't run, and I was pretty easily able to figure out why. The spark plug wire pulled apart inside the boot where it should clip onto the plug. Googling didn't turn up much info on parts availability and I know the company no longer exists. I don't want to drop a ton of coin on this thing. Is there another brand of saw I can steal the coil from that's compatible? Solder splice on an automotive spark plug wire on and heat shrink the bejezus out of it?
[/chain saw question]
 
Re: THe NAC Lots-O-Post Thread

asp said:
[chain saw question]
My girlfriend's father recently gave me a barely used McCullough Maccat 35cc 16" bar saw. I know it's nothing special, but I figured hey, it's free, and it's my first saw and it will only see intermittent use. I probably don't need the 80cc and 24" bar Stihl or Husqvarna that a lot of people seem to lust after.

As with any free tool, it's not free. It doesn't run, and I was pretty easily able to figure out why. The spark plug wire pulled apart inside the boot where it should clip onto the plug. Googling didn't turn up much info on parts availability and I know the company no longer exists. I don't want to drop a ton of coin on this thing. Is there another brand of saw I can steal the coil from that's compatible? Solder splice on an automotive spark plug wire on and heat shrink the bejezus out of it?
[/chain saw question]
Click to expand...

BAM
http://www.amazon.com/NGK-J1-Water-Tight-Connector/dp/B0018JXIXI/
 
Re: THe NAC Lots-O-Post Thread

chedisme said:
2 things I just saw on modern marvels that we need at the next NAC event.

First is the mobility denial system. Its some lube shit you sprat with a hose that turns any surface more slippy than ice.

And second is the puke light. Some led thing that makes you puke.
Click to expand...
1. a barrel will also work

2. we can just drop an led into the gas can to be passed around and it will have the same effect
 
Re: THe NAC Lots-O-Post Thread

sheepjeep said:
2. we can just drop an led into the gas can to be passed around and it will have the same effect
Click to expand...

:laugh::shhh:
 
Re: THe NAC Lots-O-Post Thread

asp said:
[chain saw question]
My girlfriend's father recently gave me a barely used McCullough Maccat 35cc 16" bar saw. I know it's nothing special, but I figured hey, it's free, and it's my first saw and it will only see intermittent use. I probably don't need the 80cc and 24" bar Stihl or Husqvarna that a lot of people seem to lust after.

As with any free tool, it's not free. It doesn't run, and I was pretty easily able to figure out why. The spark plug wire pulled apart inside the boot where it should clip onto the plug. Googling didn't turn up much info on parts availability and I know the company no longer exists. I don't want to drop a ton of coin on this thing. Is there another brand of saw I can steal the coil from that's compatible? Solder splice on an automotive spark plug wire on and heat shrink the bejezus out of it?
[/chain saw question]
Click to expand...
Go on ereplacementparts.com and see if they have one. I buy almost all my replacement chainsaw parts there, decent prices and they have exploded diagrams for damn near everything.

sheepjeep said:
1. a barrel will also work

2. we can just drop an led into the gas can to be passed around and it will have the same effect
Click to expand...

we need some of those drainage tubes at F&F. Oh and a hill.
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
260
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
352
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
246
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
301
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
225
REWSTER
REWSTER
Back
Top