THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

I have no idea what day or how soon it'll be. Probably be first thing on a saturday though. I have to either go down there or call tomorrow. But I do want to go back and just double check to make damn sure it is what I want. Maybe pull the cover and see gear ratio, LSD or not, check spline count.
 
Re: THe NAC Lots-O-Post Thread

mini=man said:
I have no idea what day or how soon it'll be. Probably be first thing on a saturday though. I have to either go down there or call tomorrow. But I do want to go back and just double check to make damn sure it is what I want. Maybe pull the cover and see gear ratio, LSD or not, check spline count.
Click to expand...

Front or rear?
 
Re: THe NAC Lots-O-Post Thread

I'm goin to Foxwoods and then a "gentleman's club" in a stretch Escalade on Friday. Gonna be siiiiiiick!!!
 
Re: THe NAC Lots-O-Post Thread

Dundy said:
I'm goin to Foxwoods and then a "gentleman's club" in a stretch Escalade on Friday. Gonna be siiiiiiick!!!
Click to expand...
I've only been to one strip club. It wasn't bad but I can't see wasting tons of $ on it. We were going to go to the one in that neck of the woods for my buddy's party but by the time everyone decided they wanted to go no one was sober enough to drive and we were all too cheap to buy a cab.
 
Re: THe NAC Lots-O-Post Thread

strip clubs don't really interest me that much.

Keith - oh, it's a rear 60? Even easier, excellent.
 
Re: THe NAC Lots-O-Post Thread

MoparManiac said:
What year? Discs?

According to my limited research (I've never pulled a shaft to check) they're supposed to have 35-spline c-clip shafts.
Click to expand...
Not sure on year. I looked at it real quick from a distance as I was looking for stuff for my dad. Saw what looked like a 60/70 cover and discs in the rear of a E-250
 
Re: THe NAC Lots-O-Post Thread

Through my searches it's looking like a SF. Which is fine because my foot it not heavy on the win pedal and I'd put money on blowing up a 231 before a 35sp 60 with 37s
 
Re: THe NAC Lots-O-Post Thread

vetteboy said:
I'm special.

I've been running them since April 2007, so I can't really complain I suppose, but my situation is worse than others. I built my link crossmember assuming the transmission was centered, which it really isn't. So my whole drivetrain sits at a little bit of an angle and requires some serious tugging to get the motor mount bolts through.
Click to expand...
why no remove the bolt and nut that connect to the frame, then lift motor then remove crossbolt with no stress on it i dont get why peaple just remove the cross bolt
 
Re: THe NAC Lots-O-Post Thread

mini=man said:
Through my searches it's looking like a SF. Which is fine because my foot it not heavy on the win pedal and I'd put money on blowing up a 231 before a 35sp 60 with 37s
Click to expand...
well your only gonna beable to have it open or welded, and with deep gears you may or maynot brab le to get crosshaft in/out, dude do it right so it once, e350 rear keep on looking dont just jump on buying a axle without researching trust me
 
Re: THe NAC Lots-O-Post Thread

ROBZ95Xj said:
why no remove the bolt and nut that connect to the frame, then lift motor then remove crossbolt with no stress on it i dont get why peaple just remove the cross bolt
Click to expand...

No, I get that.

It's putting it back together again that's the bitch part. That bushing gets pretty damn torqued even just making all the holes line up again.
 
Re: THe NAC Lots-O-Post Thread

Dundy said:
I'm goin to Foxwoods and then a "gentleman's club" in a stretch Escalade on Friday. Gonna be siiiiiiick!!!
Click to expand...

SCORP BAR. $5 beers are gay though, which is why you get drunk somewhere else first. and you can usually find rich kids with tubs of beers and a couple scorpion bowls who are there for a bachelor/bachelorette/birthday party who are willing to make friends with you and then you recieve free beer. happens almost every time im there lol.

and why the eff are you going when i have plans?


asp said:
I've only been to one strip club. It wasn't bad but I can't see wasting tons of $ on it. We were going to go to the one in that neck of the woods for my buddy's party but by the time everyone decided they wanted to go no one was sober enough to drive and we were all too cheap to buy a cab.
Click to expand...

ive been once. in tucson arizona. they were all vaguely mexican
 
Re: THe NAC Lots-O-Post Thread

woohoo, probably gonna install the plug for the welder on Saturday morning at around 9ish. Also gonna make an extension cord for it too... my electrician friend said he'll do everything for $100, I'm happy :)
 
Re: THe NAC Lots-O-Post Thread

So I was looking through my old pics to find the military thing I was talking about earlier, which I'll post first, but I found some real winners in there too. Figure this time of night is slow in here so I'll give y'all something to do. :D

5370728207_a61d353cf3_z.jpg


5371333736_b24b0cd1f9_z.jpg


5370728329_2c2128ff7f_z.jpg


5370728395_071df8a94c_z.jpg


Verrazano Bridge and NYC skyline in the background.

5371333938_6a39323e6e_z.jpg


5370728499_58fd3cc9f5_z.jpg


5371334062_311c5c9057_z.jpg
 
Re: THe NAC Lots-O-Post Thread

yayyy for white dots at work :(
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
257
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
350
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
244
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
297
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
223
REWSTER
REWSTER
Back
Top