THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
and then you can come here and change the fluid in my diffs?
and then you can come here and change the fluid in my diffs?
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
I just drained and refilled my rear 44 on Monday. Fluid looked eh. I should really replace all the bearings in it as they looked discolored from water/overheating or something.
And my pinion seal is still leaking everywhere. I need to check for a groove worn into the yoke or something.
I just drained and refilled my rear 44 on Monday. Fluid looked eh. I should really replace all the bearings in it as they looked discolored from water/overheating or something.
And my pinion seal is still leaking everywhere. I need to check for a groove worn into the yoke or something.
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
Its from too much use. This is why I don't drive my Jeep that much, to save tread on my tires and unnecessary strain on driveline parts/seals.
Its from too much use. This is why I don't drive my Jeep that much, to save tread on my tires and unnecessary strain on driveline parts/seals.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
Haha no such thing as too much use. I hate it when I can't go wheeling at least twice a month.
Haha no such thing as too much use. I hate it when I can't go wheeling at least twice a month.
ktm racer 419
NAXJA Forum User
- Location
- ROW DIALIN
Re: THe NAC Lots-O-Post Thread
i always put a bead of rtv around the seal for good measure
i always put a bead of rtv around the seal for good measure
billyjp2
NAXJA Forum User
- Location
- Indian Orchard MA
Re: THe NAC Lots-O-Post Thread
too much jumping does that to the fluid
too much jumping does that to the fluid
sheepjeep
NAXJA Forum User
- Location
- Boston, MA
Re: THe NAC Lots-O-Post Thread
nice 4wd.com erased their sales records and dont have my order of my lift kit from 2005
nice 4wd.com erased their sales records and dont have my order of my lift kit from 2005
redneckboarder
NAXJA Forum User
- Location
- cumberland RI
Re: THe NAC Lots-O-Post Thread
i could do that but ive played around with the calculator a lil bit and as it turns out i dont know my a$$ from elbow as far as suspension geomotrey, if you tell me where to put stuff i can make it go there real easy.
soooo if i have the $$ lying around im gonna either have someone design me a 3/4 link or buy one
i could do that but ive played around with the calculator a lil bit and as it turns out i dont know my a$$ from elbow as far as suspension geomotrey, if you tell me where to put stuff i can make it go there real easy.
soooo if i have the $$ lying around im gonna either have someone design me a 3/4 link or buy one
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
Where have people bought Harmonic Balancers from before? I just called NAPA and they said it was a dealer only item, except both NAPA and Autozone have it listed on their websites.
Where have people bought Harmonic Balancers from before? I just called NAPA and they said it was a dealer only item, except both NAPA and Autozone have it listed on their websites.
scully
NAXJA Forum User
- Location
- ma/nh border
Re: THe NAC Lots-O-Post Thread
hey Carmelo hows about completing the karma circle and hooking me up with a front shaft? all u can pull at holland's is off for this year, so i wont be able to grab a replacement for the one i gave u... and i need to swap in that d30 soon...
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
If you REALLY want it back I haven't shortened it yet.
If you REALLY want it back I haven't shortened it yet.
Dundy
NAXJA Forum User
- Location
- Taunton, MA
Re: THe NAC Lots-O-Post Thread
I AM READY FOR FALL CRAWL!!! I trimmed the back of my front fenders a little bit more and flexed it up on a rock and I no longer rub! even when the hockey pucks completely miss the bumpstop.
I AM READY FOR FALL CRAWL!!! I trimmed the back of my front fenders a little bit more and flexed it up on a rock and I no longer rub! even when the hockey pucks completely miss the bumpstop.
scully
NAXJA Forum User
- Location
- ma/nh border
Re: THe NAC Lots-O-Post Thread
i saw that u had extra shafts or something, thats why i asked. :spin1:
i may really need it back. i stopped by hollands and they said maybe no all u can carry this fall....but it may be a week or two until i REALLY need it, since itll take me a little while to chip away at the swap.
i saw that u had extra shafts or something, thats why i asked. :spin1:
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
Nah, that's the only front driveshaft I have. I was going to use it soon but it really is yours since you gave it to me for nothing.
Nah, that's the only front driveshaft I have. I was going to use it soon but it really is yours since you gave it to me for nothing.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
On another note carpet and seat is out of the comanche, plenty of floor rust. Forgot my grinder's key wrench thingy so I couldn't start cutting it up. Also it doesn't want to start, I'm thinking bad gas or CPS?
On another note carpet and seat is out of the comanche, plenty of floor rust. Forgot my grinder's key wrench thingy so I couldn't start cutting it up. Also it doesn't want to start, I'm thinking bad gas or CPS?
scully
NAXJA Forum User
- Location
- ma/nh border
Re: THe NAC Lots-O-Post Thread
cps, maybe slight rust on the flywheel causing it not to read, is my guess.
i had about three gallons of gas out of my parts xj that was sitting for two+ years, and i felt no difference in mine when i threw it in there.
and hopefully ill be able to find another shaft, so even if i need that one back, ill be able to give u another. i dont want to be an indian giver. (whatever that phrase comes from, i have no idea,as far as i know indians traded and bartered)
so worse case, keep an eye out for a shaft if u must cut it up, or if i get it back, ill be lookin out for one for u!
cps, maybe slight rust on the flywheel causing it not to read, is my guess.
i had about three gallons of gas out of my parts xj that was sitting for two+ years, and i felt no difference in mine when i threw it in there.
and hopefully ill be able to find another shaft, so even if i need that one back, ill be able to give u another. i dont want to be an indian giver. (whatever that phrase comes from, i have no idea,as far as i know indians traded and bartered)
so worse case, keep an eye out for a shaft if u must cut it up, or if i get it back, ill be lookin out for one for u!
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
It cranks just doesn't fire up. It ran two days ago and all I did to it was pour in some gas but as far as I know it's good gas. Maybe it flooded itself, my cherokee does every once and a while.
It cranks just doesn't fire up. It ran two days ago and all I did to it was pour in some gas but as far as I know it's good gas. Maybe it flooded itself, my cherokee does every once and a while.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
Also if you end up needing the shaft let me know. We'll probably have to figure out a way for it to get to you.
Also if you end up needing the shaft let me know. We'll probably have to figure out a way for it to get to you.
Similar threads
