5spd_xj
<<the good ol days
- Location
- Dracut, MA
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
Re: THe NAC Lots-O-Post Thread
thats right, there was a 95 locally i missed on cs the other night, idealy a 5spd would be best
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
:shhh: ive decided to put black jeeps 97+ header panel, fenders, and mirrors on red jeep. ill get another black hood, 2" lift and if i find some 4.10's ill find some 33x10.50's
:shhh: ive decided to put black jeeps 97+ header panel, fenders, and mirrors on red jeep. ill get another black hood, 2" lift and if i find some 4.10's ill find some 33x10.50's
5spd_xj
<<the good ol days
- Location
- Dracut, MA
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
wtf, i got stuck at work till almost 7, just got home, kind hungry...
...and I find a note that everyone went to olive garden for dinner, I got stuck at work late AND missed a free dinner at olive garden because I was stuck at work late :smsoap:
Oh well, at least it was only olive garden.
wtf, i got stuck at work till almost 7, just got home, kind hungry...
...and I find a note that everyone went to olive garden for dinner, I got stuck at work late AND missed a free dinner at olive garden because I was stuck at work late :smsoap:
Oh well, at least it was only olive garden.
rweaver138
NAXJA Forum User
- Location
- Brooklyn, CT
Re: THe NAC Lots-O-Post Thread
my rear shackle box decided to seperate itself from the rest of my jeep :thumbup:
my rear shackle box decided to seperate itself from the rest of my jeep :thumbup:
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
reason to buy/build shackle relocation brackets :thumbup:
^
reason to buy/build shackle relocation brackets :thumbup:
rweaver138
NAXJA Forum User
- Location
- Brooklyn, CT
Re: THe NAC Lots-O-Post Thread
its just held on by a couple grade 8 bolts for now, should do something about that.
its just held on by a couple grade 8 bolts for now, should do something about that.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
I have a ridiculous amount of cool stuff in my jeep right now.
I have a ridiculous amount of cool stuff in my jeep right now.
2000bluexj
NAXJA Forum User
- Location
- Mass
Re: THe NAC Lots-O-Post Thread
So much with just swapping my other knuckle on. Looks like im takin the bus to work and putting in all new BJ's thurs. Oh well, at least I wont have to worry about them for awhile and im doin moogs
So much with just swapping my other knuckle on. Looks like im takin the bus to work and putting in all new BJ's thurs. Oh well, at least I wont have to worry about them for awhile and im doin moogs
mini=man
NAXJA Forum User
- Location
- Neh Hampshuh
Re: THe NAC Lots-O-Post Thread
The rear axle is almost done now. The 28 shim was too much and the 18 was too little, I'm going to see if I can get a 23 from the dealer tomorrow. But for now I opened up the front and got the diff out and will press off the bearings tomorrow morning to check those shims and make test bearings out of the factory ones.
The rear axle is almost done now. The 28 shim was too much and the 18 was too little, I'm going to see if I can get a 23 from the dealer tomorrow. But for now I opened up the front and got the diff out and will press off the bearings tomorrow morning to check those shims and make test bearings out of the factory ones.
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
:thumbup: cool beanz.
:thumbup: cool beanz.
Re: THe NAC Lots-O-Post Thread
the more i think of it wheelin a 5spd would be funner, i just havent had the pleasure of doing so yet
JrTxJ
NAXJA Forum User
- Location
- Canton, MA
Re: THe NAC Lots-O-Post Thread
I was going to say this place is cooler than any of the sh!t in your jeep but then I realized it's just a picture of your yo fire crotch
I was going to say this place is cooler than any of the sh!t in your jeep but then I realized it's just a picture of your yo fire crotch
xjbump
NAXJA Forum User
- Location
- S.E. Mass, just above the Cape
Re: THe NAC Lots-O-Post Thread
Nothing specific just a general observation, I do work in Brockton from time to time.
By the way are you around tomorrow Colin? I was gonna swing by and pick up all the junk you want out of the yard.
I did also dodge a bullet today as the sheriff's office was going to serve my ex with the custody papers at my house while she was visiting my daughter, however they didnt show. I really wasnt in the mood to deal with her after that.
Nothing specific just a general observation, I do work in Brockton from time to time.
By the way are you around tomorrow Colin? I was gonna swing by and pick up all the junk you want out of the yard.
I did also dodge a bullet today as the sheriff's office was going to serve my ex with the custody papers at my house while she was visiting my daughter, however they didnt show. I really wasnt in the mood to deal with her after that.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
Ken left my house a few minutes ago. He has a pretty bad head gasket leak on cyl #6. Every compression cycle results in an abrubt release of pressure. Also, we started making the ramps for his m54a2... We got all the angle iron cut to length (my chop saw is da beezkneez) and one of them has been measured square and has all 24 pieces of angle iron tacked to it... I did a lot of welding. Still have to get the other one square and tack on all the pieces. Not sure if I'll burn them home with the stick or the mig. Mig is so much cleaner, but stick has a better duty cycle...
I'm currently waiting on my order from heleta to arrive before I can make much more progress on the doubler... Thankfully it'll be here tomorrow.
I'm glad that more and more people are seeing the light.
That could have been ugly... This isn't your current girlfriend, is it? Forgive me for asking and feel free to not respond - I don't know all the details...
I've never measured all the pieces in the install kit, but is there a 0.005 shim you could use with the 0.018.
That looks sooo much better. good work.pic is only after 1 coat of paint, but those who hae seen the garage know how much of an improvement it is, its already alot brighter in there
Ken left my house a few minutes ago. He has a pretty bad head gasket leak on cyl #6. Every compression cycle results in an abrubt release of pressure. Also, we started making the ramps for his m54a2... We got all the angle iron cut to length (my chop saw is da beezkneez) and one of them has been measured square and has all 24 pieces of angle iron tacked to it... I did a lot of welding. Still have to get the other one square and tack on all the pieces. Not sure if I'll burn them home with the stick or the mig. Mig is so much cleaner, but stick has a better duty cycle...
I'm currently waiting on my order from heleta to arrive before I can make much more progress on the doubler... Thankfully it'll be here tomorrow.
Last edited:
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
So that was an interesting ride. Took the bike to meet up with a few friends who I haven't seen in probably over a year. On the ride to the movie theater (met up and eventually saw 'the other guys') all of a sudden my engine started bucking bad, suddenly RPMs would drop off hard and then fire back up. It ran smooth as silk up to 6k RPM then all hell broke loose after that. Got it to starland (batting cages to kill time and meet) and shut it down...
..fired it back up and it has been running fine all night. Damn carburetors. Gotta clean them again, gotta try draining the bowls tomorrow to see if I get anything out. And I was planning on riding to work in the am, so much for that.
Tomorrow I think I will finish mounting the rear bumper (drill 6-8 holes and bolt her up) and be done with it.
So that was an interesting ride. Took the bike to meet up with a few friends who I haven't seen in probably over a year. On the ride to the movie theater (met up and eventually saw 'the other guys') all of a sudden my engine started bucking bad, suddenly RPMs would drop off hard and then fire back up. It ran smooth as silk up to 6k RPM then all hell broke loose after that. Got it to starland (batting cages to kill time and meet) and shut it down...
..fired it back up and it has been running fine all night. Damn carburetors. Gotta clean them again, gotta try draining the bowls tomorrow to see if I get anything out. And I was planning on riding to work in the am, so much for that.
Tomorrow I think I will finish mounting the rear bumper (drill 6-8 holes and bolt her up) and be done with it.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
Tranny is in with my dumb spacer plate. Tranny jacks are awesome. I have cool new shocks thanks to colin. Poopidy poopidy poop.
Tranny is in with my dumb spacer plate. Tranny jacks are awesome. I have cool new shocks thanks to colin. Poopidy poopidy poop.
Similar threads
