So Cal Karma 2008

Status
Not open for further replies.
porcelain tile (80) pieces of 12"x12" and (20) pieces of 6"x12" with bull nosed edge for base
P1010687.jpg

P1010686.jpg
 
older style 35x12.50x15 MTR on steel wheel good for spare lots of tread. Wheel is 6 on 5 1/2 lug pattern, Also have to two front doors, good for making a set of 1/2 doors. Can bring these to the RG run on 7/26
 
hellbilly04 said:
older style 35x12.50x15 MTR on steel wheel good for spare lots of tread. Wheel is 6 on 5 1/2 lug pattern, Also have to two front doors, good for making a set of 1/2 doors. Can bring these to the RG run on 7/26
Click to expand...
dibs on the spare :D
 
This I'm not exactly sure, first hand, but I've read quite a bit about it and been told from others it's pretty easy. Split the thing, take off old, put on new, re-bolt.

Of course, it's never THAT simple, but yea, no special tools or anything from what I understand.
 
One twin bed, solid oak with four drawers underneath and a long skinny cabinet, some scratches but in good solid shape. Good mattress included (maybe eight to ten years old), bed is approximately 19 - 20 years old.

Older style (not antique but built a bit like one) desk with seven drawers. About 25 - 30 years old and could use a refinishing. The most major problem with the desk is one approximately 1" x 2" chunk of missing veneer on one of the drawer faces.

Older 30" (I think) gas range, worked when pulled (only removed because I got a newer stove for free).

Photos of all these items will come soon. They are all available as of today and I'd like to move them fast, I'll probably keep them around for a week, maybe two, before I haul them off to the Goodwill.

If you are interested PM me, I do not watch this thread.
 
Stock draglink up for grabs. Has a fairly new stabilizer pin installed for aftermarket steering stabilizers
 
Oak twin bed. This is a veneer over fiberboard but actually more stout than you'd expect. Drawer faces and cabinet door are solid wood. Has some dings and such but overall in good shape for about twenty years old.

TwinBed.jpg

No, the M416 is not included.
 
Large desk and lateral file. To be honest this desk isn't great. It's big, it's heavy, and it's fiberboard. There is a return that is supposed to be with it but that's long gone. Also included is a matching lateral file that is equally big and heavy.

The desk is 59" x 29" and the file is 38" x 18", aside from being ugly (and big and heavy) they are structurally sound.

BigDesk-File.jpg
 
Last is a large mirror in case you want to check yourself out. Dimensions are 60" x 36" and it's equipped to hang on a wall. It's an old mirror (it wasn't new when my parents got it 30 years ago) and does show some signs of age (there are a couple of small spots where the silver backing is gone on the edges).

Mirror.jpg
 
Stock front bumper of a 95. Black steel bumper with end caps and brackets that came off my 95 XJ. Free to a good home. Located in Rancho Cucamonga.

Chris
 
D30 brake rotors & EBC green pads both have about 1000miles on them, almost like new.

Stock steering setup (draglink & tierod with TRE's). Cleaned up & wrapped up, my old trail spare.

P/up stuff in Corona.
 
Status
Not open for further replies.

Similar threads

C
1999 XJ 4 door lifted on 35s with Dana 44s & extras – under 76K miles
Replies
10
Views
6K
Anak
Anak
Squarecat
FS 1993 4 door 4.0 auto - $2500
Replies
6
Views
799
Squarecat
Squarecat
M
FS: CLEAN Lifted 1989 Jeep Cherokee XJ Limited 4.0L 4x4 - SW Virginia
Replies
11
Views
2K
maalox
M
Goatman
Team NAXJA/Petty Cash Racing stock class KOH race report
2
Replies
21
Views
4K
Jump This
Jump This
kastein
2001 Comanche R/T
2 3 4
Replies
66
Views
18K
kastein
kastein
Back
Top