- Location
- West Sacramento, CA
If you're a
member and can only make one Rubicon run this summer, go on the big August run. If you can't take a week off, or can't wait that long, come run it with me in June.
I'll be hosting a Rubicon run for
members June 23-25. Further details will come out as we get closer, but now you can put this on your calendars.
Also, please make sure your junk doesn't suck.
I'm looking forward to getting back out on the rocks and hopefully seeing a lot of you to start off the rock season.

I'll be hosting a Rubicon run for

Typical Sierra Chapter Rubicon requirements are:
One locker or two limited slips.
-31" tires
-Spare front axle shafts if you are running 260 joints.
-Spare rear shafts if you have a Dana 35 or a 27 spline 8.25.
-tow strap
-tow points front and rear
-T-case skid.
-Appropriate gearing for tire size. For example: 31's could run stock 3.55's, 33's should have at least 4.11's, 35's should have 4.56's. Low T-case gears can make up for diff gearing deficiencies.
-Spare tie rod and drag link if you are running 33's or larger and still have stock steering.
Stuff that is nice to have:
-If you care about body damage, get some rocker skids. The 'Con LOVES to bite XJ rockers when running smaller lifts/tires.
(list adapted/stolen from CRASH)
required equipment:
1. Visably charged fire extinguisher(BC or ABC)
2. First aid kit
3. Adequate spare tire, jack, and lug wrench
4. Safety belts for driver and any current passenger(belts must be worn at all times while vehicle is moving!
5. Adequate attachment points in the front and rear of the vehicle
6. Snatch strap without any metal hooks
7. Secured battery(no bungee cords!)
CB radio is highly recommended.
Also, please make sure your junk doesn't suck.
I'm looking forward to getting back out on the rocks and hopefully seeing a lot of you to start off the rock season.