Needed 2 dana 44 flanges

[brothrDave]

I was looking for 2 Dana 44 axle flanges/part that bolts the axle to the housing G2 sent me the wrong ones with there kit and I did not check them before I pressed bearings on (Im a Dum Dum) just wondering if anybody close to the Dublin/Bayarea might have something laying around that you dont need because I dont think they are going to help me
thxs

 

[the_weirdo]

Here's the part number you need for XJ dana 44 retainer plate: 83504190. Same part as Wrangler YJ.

 

[blondejoncherokee]

i have 2 stock 44 backing plates that go on the axle before the bearings, took em off when i went to tj backing plates. i know you said flanges but in case you meant backing plates...i can ship themm

 

[Bryan C.]

Do you have disc brakes on that thing? If so you will need some plates from a Rubicon D44(they will need to be redrilled for the XJ housing), if not a standard D44 plate will work.

You can also cut a small section of the ring off and just slide it on your axle so you don't have to press the bearings off and back on.

I don't have any, but I might be able to order some for you through work if need be.