*NEED HELP ASAP* - Dash question

[MyJeepXJ]

Im leaving on a trip tomorrow, and want to place a mount right where my finger is pointing... Ive never seen lights come on there, but that doesnt mean there isnt a bunch of lights, or anything else, there.

Will I be safe to screw a mount in there? Screws will be just long enough to be solid, not 3 inches or anything stupid. :O

Thanks!

 

[Fire54]

I had my 90 apart and I do remember anything being there. I have a valet switch just below that and that is all the wiring I remember.

 

[FRAM]

That's where they normally mount the optional clock. Take a philips screw driver and undo the 4 screws for the dash bezel and you will find that there is two screws holding that piece you are pointing at in place.

Unscrew it and check it out. I suspect it's only a spacer in your truck. In mine it's a clock.

 

[MyJeepXJ]

Got it! See my digital article!

http://th3ub3rg33k.com/home/detail.asp?iData=28&iCat=274&iChannel=2&nChannel=Articles

Andrew

 

[XJ Jeepin Girl]

I've always wondered what went there. Mine had nothing there when I bought it, but 2 screw holes and one other hole. I'm assuming someone else mounted something there, or there really was a clock there at one time. Good to know.

 

[dizzymac]

I just found it nice to hear a Jeep...mine hasn't been run in a couple of months.......WAHHH !!!! I want my Jeep back...lol. Thats a cool set up.

 

[FRAM]

Got it! See my digital article!

http://th3ub3rg33k.com/home/detail.asp?iData=28&iCat=274&iChannel=2&nChannel=Articles

Andrew

Nice article. Nice setup

 

[TiRod]

Glad it worked out - nice mounting. For those with the clock in the big square please post photos - my factory digital is in the small rectangle above and hard to see. A bigger clock would be nice.