chris420
NAXJA Forum User
- Location
- California
I have had a hard time finding a frame stiffner that would work with the Full Traction kit that I curently have on my Jeep. I did not want to plate the unibody as I would have needed to open the holes in the unibody for the Full Traction brackets to fit back on and they may not fit back on at all as the unibody would be wider than before. So I decided to use 1.75 OD Tubing to build a subframe that will run from leaf spring bracket to Full Traction controll arm mounts. I am no were near done yet but here is the begining. I plan on this being the fondation for everything such as a new set of Rockrails, Skid plate and roll cage.