tcharon
NAXJA Forum User
- Location
- Lake Tahoe, NV
Detroit Electrac Truetrac only $70 Dana 44, Eaton, 30 Spline 3.92 gears up. Cost $1000 new. This is from my front & has 7623 miles on it. Includes 2 attached bearings & matching races. It stays in limited slip mode so acts just like a Truetrac now, although it is really an Electrac model, which can switch to full locker mode by electric switching. It could be worked on and be returned to switchable mode. It doesn't make noise. Missing the wave spring that sends it from full lock to limited slip but magnetic coil that locks it shorts out the fuse so doesn’t lock now. If you can re-wind the coil or find the short & get a wave spring you should be able to return it to full action. You can leave it alone and just run it as a limited slip Truetrac, no problems. I will give you more help with install if you need. Will also sell my rear Electrac which may come out about Dec. 1, ~ same miles. Same locker but coil works fine so it locks, has wave spring but mostly does not unlock. It's like running a spool when it's hot, does unlock when cools down. When hot also chucks on pavement like it's catching. I think needs a stronger wave spring and it may be fine, lock & limited slip. This ad is for the front but ask me about the rear if interested. $70 US or equal CAD + shipping & $10 to box & take to your shipper. You check shipping cost from 59917 Eureka or V0B 1M0 Fernie, BC, commercial or less expensive USPS, 31 pounds boxed, 9 x 9 x 9”, or you can come get it for free in Eureka, MT or Fernie, BC. Ask any questions. Tom
