Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

[Big Red]

Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

Nice dana full width dana HP44 & Ford 9" axles with ford radius/Ruff Stuff heavy duty long arms with heim end (3 link long arm)...will include the frame end bracket mount so you can weld them up and bolt into a MJ....or a XJ with a little work (rear spring perches are different then XJ I hear) but same SOA setup.

$2000 OBO on the pair of axles with stock HP44 steering, long arms, Ruff Stuff double adj track bar ($270 new), also newer 6" Rubicon Express coil springs....so this is a plug and play upgrade for someone.

I wish I had this setup on Big Red in my avatar pic years ago on the Rubicon instead of weld on RE suspension system for the HP44 and then running their drop brackets and adj short arms...cost way too much $ doing it like that and still not having long arms.

Dana HP44 front axle with 4.10 gears and lincoln locked and newer Warn hubs

Ford 9" rear axle with 4.10 gears and limited slip and drum brakes both 5 on 5.5

Troy 815 222 nine four 0 nine

Located in Roscoe, IL 61073

 

[Big Red]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

Link to pics:

http://chicago.craigslist.org/nwc/cto/3134884934.html

 

[kmanxj5050]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

Spring perches will need moved in about an inch to inch and a half IIRC

 

[Big Red]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

To work in a XJ yeah perches are different width then MJ in the rear, but this is a bolt into a MJ. Front will bolt into a XJ, MJ, ZJ, or TJ once you weld on mounts that I will include attached to 2 long arms and the track bar...clean and simple and works.

 

[Big Red]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

$1800 for the pair of built axles, radius long arms with sub frame mounts, double adj. Ruff Stuff track bar, and 6" RE coils. Weld up sub frame mounts and go wheeling! :clap:

 

[Big Red]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

$1200 for the entire MJ

$1800 with 35" PC MTs on it

I pirated both bumpers and engine cooling system off of it. :laugh3:

 

[Big Red]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

Apparently I'm asking too much for my stuff! :gee:

$ and offers being considered now! :clap:

 

[XJRN]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

Wanna part the 44? Shafts?? Hubs??

 

[Big Red]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

Not parting the axles out and I probably have the whole MJ sold by tomorrow.

 

[Big Red]

Re: Dana HP44 & Ford 9" axles 4.10s locked with long arm & beefy trackbar setup

Sold