mike86xj
NAXJA Forum User
- Location
- Winnipeg,Manitoba,Canada
I'm building my own front bumper/winch mount and was wondering if anyone had any suggestions.
I was going to use 3/8 plate along the outside of the frame to just behind the large hole past the steering box. with as many bolts as possible (somthing like theese http://www.rigidco.com/web3_FbW_mounting_system_640_256c_P6240004.JPG )
and more 3/8 plate welded across the top for mounting my winch (just to the width of the frame mounts.
then a single 2.5" 1/4" wall tube bent to wrap around the winch mount and extending out to the fenders --\__/-- sorta like that
and i will incorporate d-rings in there somewhere
any suggestions would be greatly appreciated
Thanks
Mike
I was going to use 3/8 plate along the outside of the frame to just behind the large hole past the steering box. with as many bolts as possible (somthing like theese http://www.rigidco.com/web3_FbW_mounting_system_640_256c_P6240004.JPG )
and more 3/8 plate welded across the top for mounting my winch (just to the width of the frame mounts.
then a single 2.5" 1/4" wall tube bent to wrap around the winch mount and extending out to the fenders --\__/-- sorta like that
and i will incorporate d-rings in there somewhere
any suggestions would be greatly appreciated
Thanks
Mike