Winch bumper, gas tank skid, steering brace and more...

[9T3XJ]

See pics below and let me know if you have any questions.

Front winch bumper - $150

Gas tank skid - $40

MORE steering box brace - $30

Procomp ES9000 shocks, less than 1,000 miles - $40

Stock hitch - $30

Extended front bumps - Make offer

Sent from my SM-G960U using Tapatalk

 

[navyblue123]

Does the steering box brace come with hardware? And would it fit a 98 xj?


Sent from my iPhone using Tapatalk

 

[9T3XJ]

Does the steering box brace come with hardware? And would it fit a 98 xj?


Sent from my iPhone using Tapatalk

Replied to your PM.

Sent from my SM-G960U using Tapatalk

 

[Jeeparado]

What size lift are the shocks for?

 

[9T3XJ]

What size lift are the shocks for?

They came off an XJ that had about 5" lift, but the rear lower mounts were raised and the front mounts modified to eliminate the bar pins. I posted pics of the part numbers so some could Google it if they wanted.

Sent from my SM-G960U using Tapatalk

 

[ShoeterMcgav]

Any pics of the bumper on an XJ?

 

[9T3XJ]

Any pics of the bumper on an XJ?

Sorry, missed this somehow - I don't have any pics of the bumper mounted.

Sale pending on the steering box brace, everything else is still available.

 

[ShoeterMcgav]

Did you make it? The gussets are cool... maybe post some measurements? Looks shorter then the one I want to ditch.. the who XJ mount is right in front of the grill? Requires trimming? The ends turn in below the end of the lights?


It’s a long drive to hold it up to my heap... if you can hold it up to yours or something to give it perspective would be cool.

Sorry to be a pain, just want to make the drive worth it for both of us

 

[9T3XJ]

Did you make it? The gussets are cool... maybe post some measurements? Looks shorter then the one I want to ditch.. the who XJ mount is right in front of the grill? Requires trimming? The ends turn in below the end of the lights?


It’s a long drive to hold it up to my heap... if you can hold it up to yours or something to give it perspective would be cool.

Sorry to be a pain, just want to make the drive worth it for both of us

I didn't build it. The winch mounts just in front of, and below the grill so it doesn't block much air flow. It doesn't require trimming the grill if that's what your asking. The ends turn in just outside of the lights, so the front corners are protected. It might require trimming the bottom edge of your fenders if you have a 96 or older.

I can try to prop it up against my Jeep this weekend to give you a better idea. What measurements do you want?

 

[ShoeterMcgav]

Over all length, depth of end turn ins and depth of mounts?

Looks shorter then my current bumper is why I ask..

 

[9T3XJ]

Over all length, depth of end turn ins and depth of mounts?

Looks shorter then my current bumper is why I ask..

So I put a straight edge across the bumper, centered over the forward most holes used to mount the bumper. It measures about 9" from those to the leading edge of the bumper, so it should stick out ~7" from the edge of the grill. Also measured about 61.5" wide. Hopefully the pics below help explain.

Sent from my SM-G960U using Tapatalk