What is something you would never do with your XJ
- Thread starter USN0174
- Start date
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
You must've lowered it some.
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
You
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
Because it had a ton of lift for the 37's and now you're running 40" Krawlers and aren't very tall.
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
I could be wrong but I thought Led was running 7+ lift coils up front. Are you still running the same springs?
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
What's her lift height? She's on 33's?
I should be able to measure mine tomorrow with the new wheels and tires on it.
I should be able to measure mine tomorrow with the new wheels and tires on it.
Beezle
NAXJA Forum User
- Location
- thornton CO
Hmmm, interesting stuff here. I just measured mine, 70"s at the drip rails. I'm running 3.5" leafs, shackel relocation brackets and 1.5" shackels on 33's. Really I should be sitting at about 6.5-7 inches of lift but I run my leafs flat as hell, I believe my coils are 5.5" and the jeep sits pretty level all sagged out.
It is RE 3.5" stuff but she netted 4". and yes 33" duratracs @ 25psi.
YELLAHEEP
NAXJA Forum User
- Location
- Littleton, Colorado
Ok I'll play.
The BOR rig is 72 3/4" at the drip rail.
The BOR rig is 72 3/4" at the drip rail.
Rockken
NAXJA Member # 1674
- Location
- Westminster, Co.
My 88 is sitting at 75.5" at the drip rail on 37's.
uke:
xj-grin
NAXJA Member #1096
- Location
- Colorado Springs, Colorado
I'd have to argue that that is a pretty atypical barbie jeep!
YELLAHEEP
NAXJA Forum User
- Location
- Littleton, Colorado
Did they really join the front axles at the inner-c's? Looks like that steel beam of a front bumper is there as the anchor point for both frames.....
Video of it in motion on the streets:
http://autoholics.com/2013/01/07/-Double-Wide-Jeep-678013
That thing is hideous.
Video of it in motion on the streets:
http://autoholics.com/2013/01/07/-Double-Wide-Jeep-678013
That thing is hideous.
Last edited:
DutchVDub
NAXJA Forum User
- Location
- Milliken, CO
I took a measurement at the b-pillar finally. I'm running RoughCountry 4.5" lift springs and control arms up front with Rubicon Express 3.5" lift spring and 1.5" JKS Boomerang shackles out back. Brand new 315/75r16 (34.8x12.4) KM2's on brand new Trail Ready 16x10 beadlocks sitting at 30psi. Height at the b-pillar drip rail is 69 5/8"
