What are you doing to your rig - the continuing saga

[.40CalPatriot]

at least it wouldn't run over an arm on jack stands....

Damn! +1 for cody!

 

[xj-grin]

yes, that is a ROR!

 

[dannanw]

new rimz. A lot more to come.

 

[in4aride]

new rimz. A lot more to come.

Need Big Tires

 

[jeepfreak1020]

:thumbup:

Hell ya mike. And I have been thinking about my upper link and how to build it, and I think I finaly got it. Im going to plate the inside frame where it mounts to, then weld some 2.5" square tubing to it. Then I m not going to have the bolt go threw the floor, so instead im going to drill a hole threw the frame all the way to the outside to run a long ass bolt, then sleeve it inside the frame. Welding the sleeve to the frame plate and frame itself. Making it a strong SOB!

Gross!

Shiny!

ya gross! its a chevy whatcha expect!!!

 

[in4aride]

Just make sure bolt heads dont interfere with the heim........

ask how I might know thats an issue :doh:

 

[jeepfreak1020]

haha lol that why you ended up having to mount yours like you did??

And heres the crossmember I want to build over winter.

http://www.bsfab.net/?p=25

 

[Fred]

Made some progress. Chased down some short circuits, installed a new remote box, radio vs the IR remote that the 90 cane with.

Fixed the sunroof so it would close again, after Led opened after we put in the cage, and then I couldn't close it completely again.

Started installing the air system. I used the back seat catch, cut a slot through and used two SS hose clamps, plus a bracket in the back to hold the air tank. Just need to work on the wiring for the compressor and horn and finish plumbing the air line.

 

[eflores]

Tore the tranny out of my tow rig....

 

[old_man]

I picked up some Toranado calipers from the JY today. Hope to get rear disks on my D44 soon.

 

[dannanw]

No wonder why it had no breaks.....

Huh I wonder if these will fit?

 

[Hypoid]

No wonder why it had no breaks.....

Yup! That'll do it.

 

[old_man]

No wonder why it had no breaks.....

Huh I wonder if these will fit?

And I thought I was deaf.:doh:

 

[jeepfreak1020]

Made some progress. Chased down some short circuits, installed a new remote box, radio vs the IR remote that the 90 cane with.

Fixed the sunroof so it would close again, after Led opened after we put in the cage, and then I couldn't close it completely again.

Started installing the air system. I used the back seat catch, cut a slot through and used two SS hose clamps, plus a bracket in the back to hold the air tank. Just need to work on the wiring for the compressor and horn and finish plumbing the air line.

What kind of cage is that??

 

[YELLAHEEP]

What kind of cage is that??

LOL...... it's the cage out of my old "HeepII" XJ. After Mike (in4aride) flopped and then parted out the old Heep, I cut the cage out, sold it to Fred for his 2dr, and now it looks like Fred and Led got busy and got it installed into Fred's rig finally.... :thumbup:

 

[YELLAHEEP]

And I thought I was deaf.:doh:

What?!?!?! Speak up! I can't hear you over the grinding from my brakes!

 

[dannanw]

I bought it like that. Calipers drums shoes pads rotors, all bad. Not no more. Now time for fuel filter and total tune up, and change every fluid that is in it. Then start the lift.

 

[planefixer]

Latest update:

Swapped out the TCU that Troy sent to me ( thanks again :cheers and it didn't seem to make a difference.I then unplugged the harness from the TCU and left it unplugged, drove the rig while shifting maunally and it seems to be good.

Any thoughts?????

 

[Frank Z]

Pushed pins/poor contact in the connectors.
NSS needs to be replaced (I know you've already cleaned it, but it might just be beyond repair at this point)
Kickdown cable properly adjusted?
How's the tranny fluid look/smell?

Is it a constant problem or is it related to engine temp?

 

[Frank Z]

CEL still on?