Weekend is over...what did you get done?

Stroker! where is it? i need location and hoist to drop it in my xj! hehe

Mark
 
Picked up an 8.25 for my 2 door. Have to get it in to get it moving so the reall work will begin. Got the front end aligned on the 4 door. Tomorrow, is tightening up the steering box and getting tires on the 4 door.....
 
Spent all day working. Went to leave for work this morning and the Jeep was frozen (literally) to the parking spot. From driving around in all the slush last night and the temperatures dropping, the entire undercarriage of the Jeep turned to a solid block of ice overnight. After I got on the highway all the ice that was inside both of the rear wheels began to break free, instantly throwing the tires out of balance and making for some lovely vibrations.
 
That's kind of what I thought, but I saw that it looks like notches in the top of the bellhousing and there's an empty screw hole so I was just checking.

Damn thing runs like hell after sitting for two weeks.
 
I spent the day installing the Tera 2-low and AA HD SYE into my new T-case. Something is not right though. It is not shifting through the modes correctly. I know without a doubt that the case is together correctly, I think there is a issue with the 2-low shifter quadrant.
 
i ripped out my carpet to reveal the extent of my rusted floorpan on my newly acquired '93... good thing i have a current tetanus shot.
img_0365.jpg
 
Finally got the rewiring of my 92 xj buggy project completed and able to finally start it after 3 months. Now just having some weird electrical problems causing it to die 3 seconds after starting and the fuel pump to always be running whether it's turned on or not.

Thread here:
http://www.naxja.org/forum/showthread.php?p=244798287#post244798287
for more detailed info of what's going on.
 
Spent my remaining tax refund WAY too quickly at Advance Auto...
06' 4Runner:
- 3 qt's antifreeze
- in cabin and engine air filter
- grease needle
- sweet new 15qt drain pan

93' XJ:
- D30 and 8.25 dif gaskets
- 3 qts Mobil 1 synthetic gear oil
- engine air filter
- transmission filter kit
- 9 qt's DEXIII Tran fluild (6 for tranny, 3 for Tcase)
- Amazon HEX bit set so that contains a 9/16, 14mm, 5/8 hex bits. Hoping ONE of them will work on my oil filter adapter....

Spent a couple hours building a sweet new workbench and organizing the garage a bit. Have tomorrow off, so i will be working on both the cars...
P2140002.jpg


Holding off on the 8.25 until i can gather the parts for the disc brake upgrade:)
 
i m at 14k of back taxes... i m not in hurry to see how much im not getting back!:flame:
 
I decided to tear into the T-case issue tonight and found the problem to be with the shift quadrant. Some light filing to the 4-hi section to remove a burr got it working smooth again like it should. I can't wait to have 2-low on the trail. So many of our trails have tight switchbacks and axle binding is always an issue. I can say goodbye to that now.
 
I need to tear mine open... its on the list!

mark
 
You must log in or register to reply here.

Similar threads

P
1999 XJ is getting the best of me. No Start.
Replies
13
Views
531
Anak
Anak
macgyvr
Things I learned at Winterfest 2025.
Replies
5
Views
576
SAMSET
SAMSET
T
89 XJ 4.0 in a 92 YJ
Replies
0
Views
549
TOG
T
Jeepin_JD
92 XJ Sport - Resto Mod
Replies
17
Views
357
Jeepin_JD
Jeepin_JD
P
My Never Ending Overheating Problem
2
Replies
20
Views
1K
azupcountry
A
Back
Top