To-do List

[MoparManiac]

I'll start this up again.

- Front tubework
- Finish dash and install gauges
- Wheel a few times to get the tune settled in
- Finish floor behind seats
- Build hood/scoop
- Brace front bumpstop towers/inner fender area
- Build door bars
- Tidy up all the wiring

It's nice having a short/small task list compared to the previous two years

 

[ktm racer 419]

at the minimum, i can do absolutely nothing and still go

at the maximum I have a boatload of shit to do.


lq9 swap
swap out my entire drivetrain for the doubler
belly pan
driveshafts
bumpers
paint my bare metal thats errywhere
rocker armor
cage
recaros
insulate my interior better
red rope licorice dispenser

 

[5spd_xj]

redo crossmember and make a new upper link mount
do coilover stuff
swap transmission and redo driveshafts accordingly
fix the ruined exhaust
make it stop leaking fuel onto said exhaust
supercharger?

 

[ROBZ95Xj]

the easy route
relocate battery
borrow some tires
have someone drag it down

the hard way
relocate battery
buy 42's
aquire trailer
get tow rig on the road
maybee go full hydro

 

[Jeepman401]

Get off my ass and build my cage
hydro assist
Doubler?

 

[billyjp2]

1. attempt to fix XJ or 4runner
2. give up
3. part out
4. drive tacoma instead

 

[kastein]

1. everything I had on the list for NACFest 2012
2. nothing I had on the list for NACFest 2012
3. bring spares this time god damnit

 

[xcalibur223]

1. buy tires
2. finish ruffstuff steering
3. rebuild all of the superflex joints
4. install the browndog mounts and trans mount
5. maybe finish the rear shock hoops
6. maybe securely mount the exhaust
7. maybe swap shifter so there's actually a knob on it

 

[RoyalXJ]

Build my new xj

 

[Victor S.]

Locate and buy an XJ

 

[STROKER]

Mount new fuel cell and install fuel gauge



STROKER

 

[foxwar71]

ugh, maybe if I make a list I'll start working on my jeep

-New hydro assist lines
-Fix dash/wiring issues so the cluster works
-Finish rear tube/tail gate/spare tire mount
-Tie in front tube work to engine cage and finish inner fenders
-Dismount at least one rim/tire to fix rim and check a couple of the inner air lock tubes
-New winch cable/rope
-Add some lights to the front
-Wire up the AW4 shifter and TCU stuff
-Retighten control arm joints
-Front limit straps
-Redo the StaK shifters for a more positive feel
-Change fluids
-Swap pans on the AW4

 

[squashman702]

1. PM
2. Ball joints (see above)
3. bring spares this time god damnit

FIFY Ken.

 

[MrShaft696]

hah redo the rear suspension with some new shackles, so I can get the more flecks & trim allot more for 35's...already carrying (2) sets of spares....

 

[XJLI]

nothing. though i'd like to get my rear bumper built and on, and finish my cage and some mor tube stuff. i'm ready to wheel right now which is nice.

 

[D.I.T.A]

Not a lot to do but still a list

-install cb
-cut doors off
-t-case skid
-gastank skid
-swap in aw4 thats not 225 thousand miles old
-fluid coolers
-fix front pinion seal
-install acura rsx seats
-plate lca mounts
-mount up fresh tires and paint wheels
-rear locker ?
-tow hitch
-make the jeep more dog friendly

- beat it like it owes me money !!!1

 

[CTeunuch]

1. attempt to fix XJ or 4runner
2. give up
3. part out
4. SAS and wheel tacoma instead

FIFY Bill.I.Am

Mine:
-Finish front bumper
-Fix winch
-Install front locker/chromo's/RuffStuff Cover
-Build back bumper
-Wheel it, break it, cry about how I hate it, then fix it anyway
-Possibly buy a tow rig/trailer

 

[sheepjeep]

-bump stops
-wire rear locker
-replace and dumb shit i break between now and then
-touch pat

 

[xcalibur223]

1. buy tires
2. finish ruffstuff steering
3. rebuild all of the superflex joints
4. install the browndog mounts and trans mount
5. maybe finish the rear shock hoops
6. maybe securely mount the exhaust
7. maybe swap shifter so there's actually a knob on it

Also adding new battery cables to the list. Got them from 5-90

 

[xcalibur223]

1. buy tires
2. finish ruffstuff steering Welded... need to paint and install
3. rebuild all of the superflex joints
4. install the browndog mounts and trans mount
5. maybe finish the rear shock hoops
6. maybe securely mount the exhaust
7. maybe swap shifter so there's actually a knob on it
8. Battery Cables DONE