To-Do List

[MoparManiac]

- Build seat mounts DRIVER'S SIDE DONE
- OBA setup
- traction bar
- t-case skid
- fix first gear grind
- fix massive trans leak

 

[BillDunn83]

long arms are almost done and steering box is stripped ready for paint and drilling then back together and install.

still need to get the hydro assist ram and tires..

 

[RoyalXJ]

install rock sliders
setup hydro assist
rebuild lockouts with 300m upgrades
install tc skid
install steering box brace
redo rear shock mounts

 

[Jeepman401]

Truss on 44
gear 44
install axles and 3 link

less than 2 weeks, not a problem

 

[Dundy]

Build Crossmember/ t-case skid
clock winch
cut & fold quarters
apprehend and install Ross' rear bumper
install CB antenna
reinforce D30 cover
rear pads & rotors
front caliper anti-rattle clips

 

[RCman]

front caliper anti-rattle clips

You mean your not goint to make that entire drive listening to them? :laugh:

 

[90XJay]

Must-
Flip steering OTK and relocate Trac bar
Swap out front rubber brake lines
Swap out leaky gas tank
Change rear ujoint
Pick up and swap out front tires
Finally properly mount front bumper (been using it for years with bolts and welds but I've always wanted it right)

Want-
Buy new wheel bearrings and keep currents for spares
Swap out noisy ac for ac delete
Swap out noisy PS Pump

Hope my parts get here in time.

 

[MrShaft696]

anything, I haven't done now its probably too late....

 

[BillDunn83]

Long arms are done
hydro assist components on the way
still need to get tires next week.

 

[MoparManiac]

- Build seat mounts DRIVER'S SIDE DONE
- OBA setup
- traction bar
- t-case skid DONE
- fix first gear grind DONE
- fix massive trans leak DONE (hopefully)

 

[Jeepman401]

Updated list, this is going to get interesting fast


9 inch assemble
9 inch shock mounts
9 inch 3rd assemble
caliper brackets
brake lines
9 inch axle bearings
d44 lca brackets fit and weld ds
d44 clean and paint
d44 ball joints
d44 steering
d44 track bar and mount
d44 gear
d44 shock mounts
D44 assemble
clayton arms
rear springs
dana 300 reseal
install everything

 

[RoyalXJ]

Updated list, this is going to get interesting fast


9 inch assemble
9 inch shock mounts
9 inch 3rd assemble
caliper brackets
brake lines
9 inch axle bearings
d44 lca brackets fit and weld ds
d44 clean and paint
d44 ball joints
d44 steering
d44 track bar and mount
d44 gear
d44 shock mounts
D44 assemble
clayton arms
rear springs
dana 300 reseal
install everything

Damn looks like you've got a lot to do.

 

[ktm racer 419]

weld some metal over some cracks
weld some doors in place
bolt some fenders and a header panel on it.
hope my alloy d44 outer shaft gets here in time, install that with a fresh u-joint.
something for rear shocks

 

[foxwar71]

weld some doors in place

:thumbup:

 

[MrShaft696]

I decided it was time for some mega weight savings.....so I took out the headliner...

 

[XJLI]

something for rear shocks

wood blocks or rubber bands or a combination of both

 

[Dundy]

Build Crossmember/ t-case skid CROSSMEMBER BUILT; SKID THIS WEEKEND
clock winch DONE! WORKS!
cut & fold quarters
apprehend and install Ross' rear bumper
install CB antenna
reinforce D30 cover DONE
rear pads & rotors (or turn rear rotors)
front pinion bearings FINISH UP TODAY
front caliper anti-rattle clips TODAY

 

[MoparManiac]

- Build seat mounts DRIVER'S SIDE DONE
- OBA setup
- traction bar
- t-case skid DONE
- fix first gear grind DONE
- fix massive trans leak DONE (hopefully)
- Add stock seatbelts
- Build spare driveshaft
- add tab to tailgate to keep from falling off
- front d-ring tabs
- redrill leaf spring clamps
- paint bedsides/bed floor where I bobbed it

 

[MrSimon]

Need to change my rear brake pads and rotors. Apparently I need pads from a 79 el Dorado and rotors from an 84 Lincoln Continental ..... stupid conversion kit

Then, a good washing and a tank of gas.

CAN'T WAIT!!

 

[Hackmeister]

i need to....

either fix crazy electrical gremlins from my engine swapped jeep (damnit) and a slipping, leady AW-4....

or find another cheapo jeep and slap my lift and armor on it


hmm