THe NAC Lots-O-BFG KO2 Thread

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Thought it was the master cylinder that was gone in my truck but I pulled it into the garage to double check.

All three lines coming from the ABS pump were ready to disintegrate. One of them had a pinhole in it that luckily didn't blow out.

Bought a roll of nickel copper stuff and did those three, the two from the master to the prop, and the one crossing under the motor to the pass side. Gonna go pick up front hoses as well since I'm already bleeding a bunch of air out.

 

[vetteboy]

Re: THe NAC Lots-O-Post Thread

Something is hanging up in the liner of my MIG gun, and it's feeding at such intermittent speeds it's impossible to even tack weld anything. ****ing annoying.

Really would rather be building a truck right now than ripping apart my welder.

 

[XJLI]

THe NAC Lots-O-Post Thread

That happened to kens lincoln last summer. It was mad annoying, idk what he did to fix it. I'm lots of help.

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

Thought it was the master cylinder that was gone in my truck but I pulled it into the garage to double check.

All three lines coming from the ABS pump were ready to disintegrate. One of them had a pinhole in it that luckily didn't blow out.

Bought a roll of nickel copper stuff and did those three, the two from the master to the prop, and the one crossing under the motor to the pass side. Gonna go pick up front hoses as well since I'm already bleeding a bunch of air out.

Check the rear lines to, espedially where it goes between the fuel tank and frame

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

That one had already been changed by the previous owner luckily.

 

[cmelo]

Re: THe NAC Lots-O-Post Thread

Something is hanging up in the liner of my MIG gun, and it's feeding at such intermittent speeds it's impossible to even tack weld anything. ****ing annoying.

Really would rather be building a truck right now than ripping apart my welder.

I just blow it out with air, it usually works.

 

[Begster]

Re: THe NAC Lots-O-Post Thread

So I never got to see Red Bull Frozen Rush, spent the day in the ER instead.

 

[asp]

Re: THe NAC Lots-O-Post Thread

That one had already been changed by the previous owner luckily.

Did they tie the clutch slave line back up or did it rub through on the driveshaft like someone elses? :smsoap:

So I never got to see Red Bull Frozen Rush, spent the day in the ER instead.

I'm not sure who is more fragile, Pat or you. You Ok?


My XJ has a 4.0 and ax-15 now - thanks for the help Adam. Going to continue putting it back together today.

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Saw that on the facebooks. Glad you're ok Mark!

Anthony, sweet. When will it be driveable?

 

[asp]

Re: THe NAC Lots-O-Post Thread

Not sure. A few weeks probably. I still have to get a PCM and wiring harness.

 

[XJLI]

THe NAC Lots-O-Post Thread

So according to the crank pulley I'm at TDC, and the rotor is about halfway between 1 and 5 on the cap... What meow?

 

[H8PVMT]

Re: THe NAC Lots-O-Post Thread

Are your plug wires on in the wrong pattern?

 

[XJLI]

THe NAC Lots-O-Post Thread

Wires aren't even on yet I'm looking at the cap

 

[vetteboy]

Re: THe NAC Lots-O-Post Thread

TDC compression, or TDC exhaust?

 

[XJLI]

THe NAC Lots-O-Post Thread

Sean came over and did it in 5 minutes

 

[vetteboy]

Re: THe NAC Lots-O-Post Thread

You probably had the thing advanced by 1 tooth, that's how long it should've taken.

Reminds me of that beemer-whateverthe****hisnamewas guy who used to post in OEM tech all the time about how hard XJs are to work on.

 

[XJLI]

THe NAC Lots-O-Post Thread

Yea, off by a tooth... Whatever it's done lol. I flushed my heater core and have heat and then found this

So no jumping til I add some more tube

 

[Olympus Off Road]

Re: THe NAC Lots-O-Post Thread

Yea, off by a tooth... Whatever it's done lol. I flushed my heater core and have heat and then found this

So no jumping til I add some more tube

PANSY

 

[Begster]

Re: THe NAC Lots-O-Post Thread

I'm not sure who is more fragile, Pat or you. You Ok?

Ya, for the most part. Left arm will be pretty useless for a while.

Saw that on the facebooks. Glad you're ok Mark!

Thanks dude. Ya I could have been much much worse and I was in good spirits after it. Thankfully I had a helmet on.

Finally got to ride in an ambulance though!

 

[XJLI]

THe NAC Lots-O-Post Thread

Glad you're doing ok mark. I likes the thumbs up pic