- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
This I have never heard of. I thought that ground only handled the taillights.
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
I could have sworn that I read that people use the ground in the rear fender of the XJ as a theft deterrent thing. I.e. wire a relay into that and use it as a fuel cutoff. Tonight I have to clean and paint one of my brake backing plates. While that is drying maybe I will fire up the XJ and then cut that wire to see if it dies :gee:
I could have sworn that I read that people use the ground in the rear fender of the XJ as a theft deterrent thing. I.e. wire a relay into that and use it as a fuel cutoff. Tonight I have to clean and paint one of my brake backing plates. While that is drying maybe I will fire up the XJ and then cut that wire to see if it dies :gee:
mini=man
NAXJA Forum User
- Location
- Neh Hampshuh
Re: THe NAC Lots-O-Post Thread
Anyone have another good site for a write up on the XJ dual diaphram booster swap? I have the madxj one in my favorites I wanna get some other write-ups and compare/combine info. Also Ken, before I forget, thanks for grabbing that latch thing. Next time I see you I'll grab if from ya if you have it with you, but if not it's no big deal. I've learned to live with the broken one. And would you happen to recall the year of the ZJ you got the backing plates from?
Anyone have another good site for a write up on the XJ dual diaphram booster swap? I have the madxj one in my favorites I wanna get some other write-ups and compare/combine info. Also Ken, before I forget, thanks for grabbing that latch thing. Next time I see you I'll grab if from ya if you have it with you, but if not it's no big deal. I've learned to live with the broken one. And would you happen to recall the year of the ZJ you got the backing plates from?
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
No idea on the backing plates, sorry
I didn't even look, just saw the plates and yanked em.
No idea on the booster swap... that's why I grabbed the pedal and everything else, so I could just say screw it and swap everything if I had to. Just be careful pulling the pedal/MC pushrod retention clip on yours, that is the only part I forgot to get when I was at the JY so you'll need to reuse yours. The WJ swap thread I used is here, if it helps any: http://naxja.org/forum/showthread.php?t=924285
No idea on the backing plates, sorry
I didn't even look, just saw the plates and yanked em.No idea on the booster swap... that's why I grabbed the pedal and everything else, so I could just say screw it and swap everything if I had to. Just be careful pulling the pedal/MC pushrod retention clip on yours, that is the only part I forgot to get when I was at the JY so you'll need to reuse yours. The WJ swap thread I used is here, if it helps any: http://naxja.org/forum/showthread.php?t=924285
mini=man
NAXJA Forum User
- Location
- Neh Hampshuh
Re: THe NAC Lots-O-Post Thread
That clip is just an e-clip right? If so I have a ton sitting in my basement. I'm probably just going to make a huge project weekend of re-gearing, locking front, and brake swap. Maybe toss together a BYOB work party.
That clip is just an e-clip right? If so I have a ton sitting in my basement. I'm probably just going to make a huge project weekend of re-gearing, locking front, and brake swap. Maybe toss together a BYOB work party.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
I have that same WJ one Ken linked to as a PDF or .doc file I think. It's a
link but it just prompts you to download a file rather than showing a webpage. Just makes life easier when i go to print it.
I have that same WJ one Ken linked to as a PDF or .doc file I think. It's a
link but it just prompts you to download a file rather than showing a webpage. Just makes life easier when i go to print it.
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
yeah it's just a wacky little sorta almost e-clip. You have to lift part of it over the end of the peg while pushing it across. I'll see if I can grab a spare at the junkyard tomorrow morning if I wake up early enough, I boogered up the first one I pulled. PN for the WJ clip is 0603 5334 and it's the same part number for a 94-96 XJ so you should be able to pick it up cheap with overnight shipping at the dealer if you really need to, MSRP is under 2 bucks.
yeah it's just a wacky little sorta almost e-clip. You have to lift part of it over the end of the peg while pushing it across. I'll see if I can grab a spare at the junkyard tomorrow morning if I wake up early enough, I boogered up the first one I pulled. PN for the WJ clip is 0603 5334 and it's the same part number for a 94-96 XJ so you should be able to pick it up cheap with overnight shipping at the dealer if you really need to, MSRP is under 2 bucks.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
Did you need to use that clip? I didn't grab that from the JY when I got my booster. From the looks of that write-up you should be able to use the stock XJ nut/bolt...
Did you need to use that clip? I didn't grab that from the JY when I got my booster. From the looks of that write-up you should be able to use the stock XJ nut/bolt...
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
Depends on the pedal assembly you have... I know that an 89 and possibly a 90 have a bolt. I know that a 91 and 94-96 have clips, later on models probably have clips too. 92 and 93 I assume have clips because 91 and 94 do and it seems like it would be silly for them to switch back and forth. If you are careful with the stock clip or bolt while removing it I don't see why you couldn't reuse it; I did.
Depends on the pedal assembly you have... I know that an 89 and possibly a 90 have a bolt. I know that a 91 and 94-96 have clips, later on models probably have clips too. 92 and 93 I assume have clips because 91 and 94 do and it seems like it would be silly for them to switch back and forth. If you are careful with the stock clip or bolt while removing it I don't see why you couldn't reuse it; I did.
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
ughhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
ughhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
damn I gotta find another spot to park the XJ for a while, the city put up "no parking 5am-9am for street cleaning" signs
damn I gotta find another spot to park the XJ for a while, the city put up "no parking 5am-9am for street cleaning" signs
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
Mark wants to drive down to PA and buy a 79 Cherokee Cheif :dunno:
Mark wants to drive down to PA and buy a 79 Cherokee Cheif :dunno:
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
screw you, anthony and keith....this is a VW worth driving:
http://nh.craigslist.org/ctd/1681332685.html
screw you, anthony and keith....this is a VW worth driving:
http://nh.craigslist.org/ctd/1681332685.html
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
anybody need some badass leafs for a good deal? im almost tempted to pick them up and run them on red jeep when i go SUA.
http://forum.neow.net/index.php?showtopic=96711
anybody need some badass leafs for a good deal? im almost tempted to pick them up and run them on red jeep when i go SUA.
http://forum.neow.net/index.php?showtopic=96711
Re: THe NAC Lots-O-Post Thread
Anyone got a good source for rubber plugs like the ones around the edge here:
http://www.summitracing.com/parts/GMK-4020-512-69S/
Ideally looking for some in the 1 1/2" or 1 1/4" size and would like some 3/8" and 1/2" too.
I can't seem to find them that aren't wicked expensive.
No, I don't want metal plugs or plugs like this.
Thanks!
Anyone got a good source for rubber plugs like the ones around the edge here:
http://www.summitracing.com/parts/GMK-4020-512-69S/
Ideally looking for some in the 1 1/2" or 1 1/4" size and would like some 3/8" and 1/2" too.
I can't seem to find them that aren't wicked expensive.
No, I don't want metal plugs or plugs like this.
Thanks!
Hackmeister
NAXJA Forum User
- Location
- Pittsburgh
Re: THe NAC Lots-O-Post Thread
i'm going to gun for those leaves, although i kinda am low on money. i need some stiffer / taller leaves since my OMEs are shitting the bed again.
i'm going to gun for those leaves, although i kinda am low on money. i need some stiffer / taller leaves since my OMEs are shitting the bed again.
XJLI
NAXJA Forum User
- Location
- Long Island, NY
Re: THe NAC Lots-O-Post Thread
those things hold their value so damn well.
but 80s MB diesel > Vdub diesel.
those things hold their value so damn well.
but 80s MB diesel > Vdub diesel.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
pffft, VW. I am very tempted to drive down for this
http://newhaven.craigslist.org/cto/1713425448.html
Except I have next to no free time and no way to get a ride down there for the next 2-3 weeks, so I am SOL. (FWIW that CTS-V is a no-go. The guy gave me a call last night and said he already had someone on the way but if I could show up first with $$ it was mine... plus he raised the price $1000, I just went back to working on the Jeep)
Edit: damnit, looks like I am stuck at work until 6 or 6:30 and wont be picking up my shafts tonight Guess tonight will be spent prepping everything else so I can throw it all together tomorrow.
pffft, VW. I am very tempted to drive down for this
http://newhaven.craigslist.org/cto/1713425448.html
Except I have next to no free time and no way to get a ride down there for the next 2-3 weeks, so I am SOL. (FWIW that CTS-V is a no-go. The guy gave me a call last night and said he already had someone on the way but if I could show up first with $$ it was mine... plus he raised the price $1000, I just went back to working on the Jeep)
Edit: damnit, looks like I am stuck at work until 6 or 6:30 and wont be picking up my shafts tonight
Guess tonight will be spent prepping everything else so I can throw it all together tomorrow.
Last edited:
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
I'd take a TDI anyday over a hatchback foxbody
uke:
I'd take a TDI anyday over a hatchback foxbody
uke:
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
X2... I can't stand that body style for some reason. I'd take a 74-78 Mustang any day of the week but I have enough vehicular toys right now.
X2... I can't stand that body style for some reason. I'd take a 74-78 Mustang any day of the week but I have enough vehicular toys right now.
Similar threads
