Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
could I use the stock rubber bushings at both ends or do I need something else. I figure if the stock setup is rubber at both ends why couldnt these be but I could be wrong. The reason for asking is I made some short just longer than stock control arms for my 6" lift and they will not work as too much lift. I just bought all new rubber bushings also for the stock arms. Not worried about the small lip on them as I have access to a lath to turn the bushing mounts to fit the metal rubber bushing housings. Would like to use these if possible for money issues and easy to replace if need be.
RE and Rusty's both use stock style bushings. i will ONLY use rubber bushings and RE joints in anything i build. i would not use any heim joint for any suspension part, they make noise, and every bit of vibration moves through them. My current set up uses stock bushings (from RE) on both ends. pick up a set from either polyperformance.com or RE, they sell them with the bushing and the collar so all you need to do is weld away.
rehab hit it on the head. nice work. only i would run a stock rubber bushing axle end and a JJ or RE superflex at the frame. Rehab can you link me to where you got your links (2" .025 adapter and the ends) thanks
I figured just the same. I've seen plenty kits out there that use rubber bushings. I'm trying to find the cheapest source for parts right now. Hopefully can find someone local with DOM. Thanks Jeff
Anyone else with fab'd LA's post up your pics so I can get ideas LOL
I figured just the same. I've seen plenty kits out there that use rubber bushings. I'm trying to find the cheapest source for parts right now. Hopefully can find someone local with DOM. Thanks Jeff
Anyone else with fab'd LA's post up your pics so I can get ideas LOL
rehab hit it on the head. nice work. only i would run a stock rubber bushing axle end and a JJ or RE superflex at the frame. Rehab can you link me to where you got your links (2" .025 adapter and the ends) thanks
i will ONLY use rubber bushings and RE joints in anything i build. i would not use any heim joint for any suspension part, they make noise, and every bit of vibration moves through them.