korda
NAXJA Forum User
- Location
- San Diego, CA
Alright guys, I'm back at this. I updated the list. If you need any interior parts let me know, I'll give those away. The seats are already spoken for. I have all the glass too, free if you need it.
Parts of interest:
Front Suspension
- Home built radius arms. 2”-1/4” wall lowers. RE joint at frame, stock rubber at axle. RE upper control arms. 1-1/4” threaded rod adjustment. Crossmember is 2”x4”-3/16. Bolts to frame rails through side with 3”x3”-1/4” angle. Center section drops out.
$300
- Track bar: 1-1/4” OD 3/16” tube. Small RE joint at top, rubber at axle. Fixed length for about 6” lift.
$50
Body
- Sunroof glass (I’ve got two, they’re hard to find)
$50
- TJ Flares w/ lights. Cut to fit an XJ.
$50
Protection
- Cage: 1-3/4”x .188 HREW. Welded in but I’ll work with someone to remove it the way they want. Bolted at A and C pillars but welded to floor at B pillar. You’re on your own for adding more bracing. I was mainly looking to stiffen things up a bit.
$200
- Warn transfer case skid. Trimmed to fit my atlas on one corner. I’m sure it’s bent at least a little.
$40
- Quarter panel guards: 1/8” aluminum diamond plate. Cut to fit with my TJ flares.
$30
Other
- Doug Thorely Header. Brand new, ceramic coated. I got the old one warrantied and this is still in the box.
$350
- Custom Storage Box
$75
- AC Condensor, installed but system never charged. It's a little dinged up from going in and out
$50