parting out a nice lifted cherokee, and i actually bought it!

[blondejoncherokee]

i might push the picknpull date back to saturday, but not sure yet.

 

[SeansXJ]

I will snatch the steering box also Jon, my sector shaft has a nice leak.

 

[crazymoose1990]

You will need to remove the pitman arm I called dibs on that Sean. It will make it easyer for me though thanks

 

[blondejoncherokee]

the pitman is jasons, box is seans, i havent pulled the arm yet but i will.
i pulled the axles, steering, gas tank, shocks, radiator, bunch of accessories, bumper, sliders, leaves coils trackbar injectors, a/c pump, x member, brakes lines and more. so most of the stuff is ready to be sold

 

[blondejoncherokee]

Ford 9" narrowed to fit under an xj, 4.56s and a full spool , 33 spline shafts with a guaranetee from the shop if they ever break they will install carrier with 35 spline shafts....
9" 550obo (red only price)
if its not sold for 550 by sat its going up to 600$ Saturday at midnight


welded 30, 4.56s, disco
60$

35" tires dunlop m/ts-----mike 1331
2 up front are like 55% tread, and looking decent
on rims
older tires
80$


Rubicon express 4.5" rear leaves
190 obo
mj shackles---johnnie walker

rubicon express lower control arms fixed
90$obo

wj or zj uppers not sure which
15$ obo

rubicon express 4.5” coils
100$ obo


(4) doestch tech shocks for a 5.6-6.5" lift
40 obo

stainless steel brake lines ---jason
30

sway bar discos
20

Rubicon express 1600 trackbar with bracket attached
70$

really well made rock sliders –seans xj
120$ obo


all (4) doors ---justjeep94
20$


Fenders justjeep 94
Free ( he is getting all kinds of amazing deals)

all 6 injectors
15$

stock air box
10$

rear trailer hitch –jimbos07
25$


Rubicon express drop brackets with braces(braces are extra at RE, 85$ extra)---
170


Steering box seansxj
10$

Pitman arm ---crazy moose Jason

Gas tank ---ed
5$

Computer and wire harness---mike 1331
10$

Open cooling system 3 core radiatior with overflow tank, hoses, and bracket for tank
80$

Front skid ----johnnie walker
10$

Another front skid
10$

Sway bar drop brackets
5$


rear tail lights
10$

tranny----seanssxj buddy
50

 

[wilky87]

Are you willing to ship the disconnects? If so, what kind of shape are they in, and what brand?

 

[blondejoncherokee]

im not a big fan of shipping especially since i have some local interest. discos are 35$ shipped.

 

[blondejoncherokee]

 

[blondejoncherokee]

the 9" makes my geared and locked 44 look like a tiny little bitch. i wish i could keep it!!!!!! maybe i will if i dont get it sold fast! itd be a good trail spare

 

[Mike1331]

lol i've never seen someone carry around a whole axle assembly around the trails for a spare. You should keep the 9" install that and sell the d44 for what your trying to get for the 9". Same return on investment only you'd have a way stronger axle. and trust me having a 3rd member makes trail repairs 20 times easier. I wouldn't even think twice about doing this john.

 

[crazymoose1990]

Post up pictures of that 9" i want to drool !!!!!!!!!!!!!!!!!!!!!

 

[1SOLOW X]

i want the axles!!!! if you want to sell your 44 instead, i may be interested in that also

 

[blondejoncherokee]

yah i was joking as atrail spare.
and yes every 20 mins i weight the pros and cons of swapping it over. id have to regear the front and that would put the jeep outta comission until i could...
and id have to do something with the driveshaft since this was on a stock yoke, and i have a cv shaft... but that wouldnt cost more than going to west sac driveline and spending maybe 40$ max. gears are like 200 or less... could pay rob707 some cash to install them....
hmmm...
it was 4.88s it would have already been in my jeep i can say that much.\
shit i could just keep the front and use those gears! i mean im only getting 60$ for the front, way cheaper than buying gears...

but yes mike i totally agree, i was thinking i could sell my dana 44 rear with 4.88s detroit, diff skid, rear zj disc conversion with tj backing plates for like 800$ obo

the rear discs i did myself, used tj plates , new bearings, zj calipers and backing plates, that conversion alone with picknpull parts for 60$ still ended up costing 320$ total and 12 hours....

 

[blondejoncherokee]

damn...
i should pretend i never bought and sold the 9" so i dont kick my own ass down the road.

get ready for a axle-gasm...

 

[blondejoncherokee]

yah it doesnt look as big in the pcitures as it does in real life....
thats what she said...
axle tubes are massive. it seems like the housing is so massive no need for a truss. i mean the tubes on my xj 44 are pretty long, the amout of tube is so much less on this cuz the damn housing is so big

 

[blondejoncherokee]

 

[blondejoncherokee]

 

[blondejoncherokee]

 

[crazymoose1990]

So are you going to sell that axle to Anthony. If you do there is no need for all of us to come to Sac town not that it wouldnt be cool to hang out with you for a few Jon. We could do one trip to get my drop pitman arm braided brake line Eds gas tank Jims trailer hitch and Anthonys axles.. I will wait for your answer

 

[blondejoncherokee]

sliders are sold but i might not keep the bumper