NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
Let me look into it. Don't think I've seen that one yet.
My WTB list.
- Thread starter NorCalChris
- Start date
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
Its not assembled right? Would you be willing to ship it?
Vanimal
NAXJA Forum User
- Location
- escondido, ca
yea, it's in pieces. I can ship it, not sure what it would cost though. maybe do $80 shipped? im sure it's more than 10 to ship but i'll give ya a little deal since you got the carrier from me 
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
sounds good, looks good. Let me think about. I'll post up tommorow.yea, it's in pieces. I can ship it, not sure what it would cost though. maybe do $80 shipped? im sure it's more than 10 to ship but i'll give ya a little deal since you got the carrier from me
- Location
- WA state
Will you get your POS built already?
souske
NAXJA Forum User
- Location
- The land of competition
You are the insult master!
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
I'd like too, but someone borrowed my steering wheel for SoCal fest. So I can't drive it. How am I supposed to pick up trannies if I don't have a cool steering wheel?
:roflmao:
Last edited:
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
yea, it's in pieces. I can ship it, not sure what it would cost though. maybe do $80 shipped? im sure it's more than 10 to ship but i'll give ya a little deal since you got the carrier from me
Dan, lets get this shit going. paypal addy?
hawkeye 1
NAXJA Forum User
- Location
- Redondo Beach, CA
When you pick up trannies, your steering wheel is the least of your troubles.:roflmao:
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
What would I have to worry about while picking up trannies? Sounds like a good time to me. Vanimal & Souske told me not to worry, that everything will be okay. They even offered to take me in Dan's van...
Vanimal
NAXJA Forum User
- Location
- escondido, ca
Chris, pm sent
souske
NAXJA Forum User
- Location
- The land of competition
i didnt know a steering wheel was a borrowable item?
Vanimal
NAXJA Forum User
- Location
- escondido, ca
Sean doesnt know that move, he only knows "the manual tranny"
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
**Stuff is listed as wanted. It is not in any particular order as to what I want first. If the price is right I am interested. Just because I'm looking isn't a guarantee I will buy them from you..**
I'm always looking for 4.0 engines, blocks, heads, intakes,exhaust manifolds, 4.2 cranks, rods, ford 19lb injectors, etc.
Bilstein 7100's. Let me know what you have...
CB radio, antenna, mount, cable
Radar detector
SYE for a 242 or a 231. 21 spline
Good quality radio deck with aux input and preouts. iPhone compatable is a plus.
5.25 or 6.5 inch speakers in good condition
Passenger front door to fit my 89, no glass needed
4.88 gears for: HP d30, Ford 8.8, C8.25
Lockers for above axles ^^^
8.8 swap kit
ABS shafts for d30.
Hd Diff covers for: C8.25, Ford 8.8
Truss for the 8.8
HD Steering
Seat bracket for my 91 or a tan seat complete.
Front tow brackets and hooks
Skid plates for a NP242 and a NP231
Rear upper quater panel guards
Rockrails
Driveshafts
Spare OEM parts for cheap: tailights, altenators, starters, water pumps etc. 89/91
__________________
I'm always looking for 4.0 engines, blocks, heads, intakes,exhaust manifolds, 4.2 cranks, rods, ford 19lb injectors, etc.
Bilstein 7100's. Let me know what you have...
CB radio, antenna, mount, cable
Radar detector
SYE for a 242 or a 231. 21 spline
Good quality radio deck with aux input and preouts. iPhone compatable is a plus.
5.25 or 6.5 inch speakers in good condition
Passenger front door to fit my 89, no glass needed
4.88 gears for: HP d30, Ford 8.8, C8.25
Lockers for above axles ^^^
8.8 swap kit
ABS shafts for d30.
Hd Diff covers for: C8.25, Ford 8.8
Truss for the 8.8
HD Steering
Seat bracket for my 91 or a tan seat complete.
Front tow brackets and hooks
Skid plates for a NP242 and a NP231
Rear upper quater panel guards
Rockrails
Driveshafts
Spare OEM parts for cheap: tailights, altenators, starters, water pumps etc. 89/91
__________________
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
I'm always looking for 4.0 engines, blocks, heads, intakes,exhaust manifolds, 4.2 cranks, rods, ford 19lb injectors, etc.
Short bodied 12 inch Bilstein 7100's
Radar detector
4.88 gears for: HP d30, Ford 8.8, C8.25
Lockers for above axles ^^^
Front tow brackets and hooks
Yellow side marker lights
Short bodied 12 inch Bilstein 7100's
Radar detector
4.88 gears for: HP d30, Ford 8.8, C8.25
Lockers for above axles ^^^
Front tow brackets and hooks
Yellow side marker lights
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
Anyone? Looking for gears and lockers. Got a good deal on something?
Chris, I've got a 4.0 motor long block sitting in Bakersfield.
Intact, uncertain of mileage, but probably around 175K. Very fresh (1000 miles) rebuild on the 7120 head - new head bolts, valve job, magnaflux and checked for flatness (it was flat and true).
Engine ran very well, started first time every time. However, it may be low on compression. It ran smoothly, and seemed to have reasonable power. Oil pressure was normal at idle, and while driving.
Pulled the motor to install a stroker. Drove it 150 miles into the shop right before the engine swap with no issues.
Also have an AX-15 that third gear synchro is going on. No bellhousing or clutch. Did not have any noises or gear problems other than the synchro.
David Bricker / SYR
Intact, uncertain of mileage, but probably around 175K. Very fresh (1000 miles) rebuild on the 7120 head - new head bolts, valve job, magnaflux and checked for flatness (it was flat and true).
Engine ran very well, started first time every time. However, it may be low on compression. It ran smoothly, and seemed to have reasonable power. Oil pressure was normal at idle, and while driving.
Pulled the motor to install a stroker. Drove it 150 miles into the shop right before the engine swap with no issues.
Also have an AX-15 that third gear synchro is going on. No bellhousing or clutch. Did not have any noises or gear problems other than the synchro.
David Bricker / SYR
Lurch
NAXJA Forum User
- Location
- Long Beach, CA
I'll have an aussie locker for a D30 plus a 3.73 and up carrier available soon.
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
What year block? HO I assume?
Why do you think it might be low on compression? If the top end was just rebuilt it's a safe guess that the rings are toast.
NorCalChris
NAXJA Forum User
- Location
- Central Coast, Ca
Whats the aussie worth to you?
