Looking for specs on an F-250

[Menzenski]

I have a 1989 two-wheel-drive Ford F-250 with 302 and a five-speed. It was a commercial truck originally, and has a bare-bones interior. I'm trying to find some specs for it, namely, what transmission and rear axle it has, and what gear ratio. I haven't been able to find a list of specs anywhere on the net, and was thinking that someone here might be able to point me in the right direction. Thanks in advance.

 

[XJBeast96]

pm me the vin number and if you have a rear end tag, those numbers as well.
work for a ford dealer i can try to cross them

 

[w_howey]

Well, the tranny and rear axle ratio both depend.

The standard 302/5-spd is 3.08. But, if it was a factory tow package, it got a 3.55 from the factory. But, 3.73 and 4.10 were both available. The tag if it is still there has the ratio.

The tranny is either a Mazda or a ZF. The ZF is a pretty good tranny, the other isn't. I don't remember the model of the Mazda tranny.

Here is a general decoder.
http://www.ford-trucks.com/article/idx/7/022/article/Ford_Axle_Code_Chart_.html

The axle code is on the door sticker, so is the tranny.

Here is a forum for Ford trucks. Pretty light on actual tech compared to here, but you can find some stuff(think JU)
www.ford-trucks.com