Jeep Part Out

CTeunuch

NAXJA Forum User
Location
MA
I'm parting a 98 ZJ, but I will sell the whole thing for $1500 if someone wants it. It has ~170k, 4.0, 42re, NP231 with AA SYE, 2" OME lift, 8.8 with IRO brackets etc. It runs and drives fine, and would make a good trail rig. It could pass inspection with minimal work. All prices are OBO, I will ship anything, but BUYER PAYS SHIPPING.

003-2.jpg


001-4.jpg


All tires have at least this much tread left
002-5.jpg




Parts details below:

31x10.5R15 Goodyear MTR's on steelies, good tread, see picture - all 4 - $300

Ford 8.8 set-up for a ZJ with IRO brackets, professionally rebuilt ~800 miles ago with an open carrier and 3.55's, will include fresh ebrakes, rotors and calipers - $300

LP30, stock with 3.55's - $50

2" OME kit, 4 medium duty springs, 4 shocks(one is dented but works well) and steering stabilizer, all with ~2000 miles - $300

NP231 with Advance Adapters SYE, unknown miles, shifts fine in all ranges, no leaks - $200

JCR stage 1 sliders, good shape and still line up well - $150

KOR radiator support - $25

Rusty's trackbar, with upper bushing conversion and frame bracket - $75

HD steering setup, V8 draglink and IRO HD tie-rod, with newish TRE's - $60

Durango steering box, <500 miles - $75

Full set of Alpine type S speakers - $50

5.9 soundbar with Alpines - $150

5.9 roofrack, no cross bars - $50

WJ black leather front seats on power ZJ bases, good shape, small tear on drivers side - $125

2" receiver hitch with shackle set-up - $50

Stock gas tank and transfer case skid - $50/both

2.5" catback Magnaflow exhaust with 5.9 tip - $50

B&M tranny cooler, <1000 miles, new fluid when cooler was installed - $30

Clear corner lights - $20

All OEM parts are for sale too, let me know what you need. Hood is junk, as well as both front fenders. Doors are OK, rear passenger side has a big dent, hatch is OK and has glass that opens.
 
You coming PA anytime soon? I will take the tires and tcase if you do haha.
 
Where in Mass are you located?
 
Are you willing to ship the HD steering setup, V8 draglink and IRO HD tie-rod, with newish TRE's - $60?

I am located in Apalachin, NY 13732.

Yeah, no problem. I will be pulling parts this weekend, I can get you a price on shipping next week.
 
Will u sell the whole jeep? Im in central maine and can pick it up w a trailer. Please let me know. Thanks. I reread the post. If its still there next week ill come get it.
 
I can grab some parts for delivery to the Philly area, planning on being there next weekend
 
Sale fell through after 2 months of the buyer stringing me along with false promises of picking it up. Back to parting it out, all parts will be pulled on 6/9 and can be picked up or shipped after that. If you want anything I need a deposit ahead of time, other wise it will be first come first serve. Current list of available parts is:

ARB locker for Dana 30, unknown miles, operates well, but has marks on case from loosing a pinion bearing, will come with brand new, in box set-up kit - $600

AlloyUSA axle seals, good condition - $30

Ford 8.8 set-up for a ZJ with IRO brackets, professionally rebuilt ~800 miles ago with an open carrier and 3.55's, will include fresh ebrakes, rotors and calipers - $300

LP30, stock with 3.55's - $50

2" OME kit, 4 medium duty springs, 4 shocks(one is dented but works well) and steering stabilizer, all with ~2000 miles - $300

NP231 with Advance Adapters SYE, unknown miles, shifts fine in all ranges, no leaks - $200

Carolina Driveshafts rear shaft with 1310 DC at the tcase end and a 1330 Ford flange adapter at the other. ~5000 miles on shaft, ~1000 on fresh joints - $75

KOR radiator support - $25

Rusty's trackbar, with upper bushing conversion and frame bracket, all bushings are tight - $75

HD steering setup, V8 draglink and IRO HD tie-rod, with good TRE's - $60

Full set of Alpine type S speakers - $50

5.9 soundbar with Alpines - $150

5.9 roofrack, no cross bars - $50

Full set of cloth ZJ seats (front/rear), light gray, excellent shape - $50

2" receiver hitch - $50

Stock gas tank and transfer case skid - $50/both

2.5" catback Magnaflow exhaust with 5.9 tip - $50

B&M tranny cooler, <1000 miles, new fluid when cooler was installed - $30

Clear corner lights - $20

Other parts I have around:

Ford 8.8 set-up to bolt in an XJ, 4.10's, welded spiders - $100

Full set of S10 leaf springs, less than 1500 miles - $125

All OEM parts are for sale too, let me know what you need. Hood is junk, as well as both front fenders. Doors are OK, rear passenger side has a big dent, hatch is OK and has glass that opens.
 
Bump, everything is OBO and can be brought to NACfest.

Following items are gone or spoken for:
ARB, clear corners, driveshaft, steering, KOR support, alloyusa seals
 
Back
Top