Important
- Thread starter bshaw
- Start date
- Location
- Michigan
*89Laredo*
NAXJA Forum User
- Location
- Sheffield, IA
X2.
shortxjdoug
NAXJA Forum User
- Location
- Chattanooga tn
I've probably exaggerated a bit. I don't have time to tear the shafts out and rebuild them. They'll be fine until I get back.
A V-22 pitch link rod end is allowed .017 inch axial
It's not good but it will be ok.... Fill em full of that high temp grease and go
- Location
- Southwest IN
Buy the shocks, forget the springs.
I will have a set of stock leafs for you to make a fatherless pack and a set of used 2" coil spacers available in a month or so. Come and get them, I will PM you when they're ready. $0, but you will have to install.
- Location
- Southwest IN
A V-22 pitch link rod end is allowed .017 inch axial
I don't know what any of this means besides it is aircraft related, but yeah, grease the snot out of them and run it.
terrehautian
NAXJA Forum User
- Location
- Terre Haute
I think it is a package deal so I would get shocks and springs for $75. What do I need to build that pack?
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
Lol.
- Location
- Michigan
Re: Re: Important
He's got a set of stock leaves coming via parts train through Moab. Flex will be setting up a meet.
He's got a set of stock leaves coming via parts train through Moab. Flex will be setting up a meet.
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
This is something that was called art in the art museum. I had something very similar in the garage, I will start the bidding at $1000
DrMoab
NAXJA Forum User
- Location
- The Utah Backwater
This is something that was called art in the art museum. I had something very similar in the garage, I will start the bidding at $1000
Funded heavily no doubt by the national foundation of the arts or whatever they call the useless waste of money.
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
Ryan - Is there a good site to check on Utah's concealed carry laws?
- Location
- Columbus, In
I believe the front coils are a larger inner diameter than an XJ.
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
Screw aal!
My ohio ccw is good in Utah and they have the same basic carry laws.
My ohio ccw is good in Utah and they have the same basic carry laws.
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
There are differences. Make sure you know them.
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
I do but none that will effect me doing what we will be doing.
DrMoab
NAXJA Forum User
- Location
- The Utah Backwater
Can't think of a good site off the top of my head. You looking for laws like where you can carry and where you can't or whether they have reciprocity with your state? Laws are simple. Don't carry into a federal building and you are golden.
XJosh95
NAXJA Forum User
- Location
- Green Bay, WI
This is the best thing I can find on the subject. I don't know how current it is or how precise it is, but it's a good start. http://www.handgunlaw.us/
In other news: Meganne found this for Harrison today. I guess these particular models go for stupid money on ebay.
First mod will be to screw rubber floormats to the wheels for added traction.
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Let me know how the rubber mats work out.
OutkastBoss
NAXJA Forum User
- Location
- Saint louis
Yea I looked at a couple walkthroughs on it and removing the whole thing intimidates me .
If I knew anyone that had done it around here to lend a hand I would do it and learn.
Unfortunately I don't think I will try it on my own.
Can anyone shoot me a rough price on what a fair rate might be at a shop ?
I still wonder if it could be something they did but I suppose it could have just gone from nicely sealed to pouring air out.
Shitty luck
