Ramsey
NAXJA Forum User
- Location
- Shreveport, LA
Holy crap I'm black, I thought I smelled funny today.
Important
- Thread starter bshaw
- Start date
Roxtar
NAXJA Forum User
- Location
- NW Indiana-Chicago area
That's OK, you'll always be Lil-OT to us.bshaw said:
goodburbon
NAXJA Forum User
- Location
- Westcliffe Colorado.
Oh ok, I can accept that. Didn't kow about the whole loss of data thing. No mention of it in the members forum.
- Location
- Far West Suburb of Chicago
No A/C in the MJ
looking forward to Fall.
BOB
looking forward to Fall.
BOB
- Location
- Clarkdale, AZ
Got back from Sedona and Moab last night. Had a great time. And anyone that's worried about driving their XJ to Moab and breaking :dunno:
And we towed a U-haul trailer with a bunch of you-know-whats back, too...
Got a few more pics in my MWXJ gallery, I'll try to get a webshots album together over the weekend.
And we towed a U-haul trailer with a bunch of you-know-whats back, too...
Got a few more pics in my MWXJ gallery, I'll try to get a webshots album together over the weekend.
IntrepidXJ
NAXJA Member #647
- Location
- Grand Junction, CO
lesslimited said:
....done it twice now
aperwork
Gil BullyKatz
NAXJA Forum User
- Location
- 2003UB313 Planet ERIS
lesslimited said:
I am soooo jealous.
goodburbon
NAXJA Forum User
- Location
- Westcliffe Colorado.
I drove through at 10pm one night, didn't break anything.
- Location
- Southwest IN
Drove a rental TJ with a locked D35 on 33s on trails out there with no breakage. And we drove it like a rental 
HaleYes
NAXJA Forum User
- Location
- Clay County, IL
I'm home and gald to be here.
108° shit sucks.
Plan is to do absolutely nothing all day, so far I'm right on track.
Hale
108° shit sucks.
Plan is to do absolutely nothing all day, so far I'm right on track.
Hale
w_howey
NAXJA Forum User
- Location
- The Mudwest
Today is cancelled on the basis the world is conspiring against me.
Went to mow the lawn, recoil starter rope breaks off inside the mower.
Went to do some laundry, towel wraps around the agitator, washing machine screeches to halt.
Went to work on bathroom remodel. Needed to trim a piece of laminate for the vanity kit. Dropped the blade retaining bolt from the circular saw under the work bench, WAY in the back. Directions for vanity kit had me glue the dowels in the wrong holes, so I had to drill those out. Went to put in the correct cam lock dowel tapping it with a hammer. Knocked a hole all the way thru the cabinet side. Got to love vanity-in-a-box kit. Finally got it assembled and the sink on it. I don't think that the door will clear it when I reinstall the door. Went to sand down all of the patched spots in the drywall, one of the pets has siezed my sanding block and its chewed up.
Had some Jeep stuff to work on. I can't afford anything else breaking, I'm going to pilot the couch and watch the NFL network all day.
Went to mow the lawn, recoil starter rope breaks off inside the mower.
Went to do some laundry, towel wraps around the agitator, washing machine screeches to halt.
Went to work on bathroom remodel. Needed to trim a piece of laminate for the vanity kit. Dropped the blade retaining bolt from the circular saw under the work bench, WAY in the back. Directions for vanity kit had me glue the dowels in the wrong holes, so I had to drill those out. Went to put in the correct cam lock dowel tapping it with a hammer. Knocked a hole all the way thru the cabinet side. Got to love vanity-in-a-box kit. Finally got it assembled and the sink on it. I don't think that the door will clear it when I reinstall the door. Went to sand down all of the patched spots in the drywall, one of the pets has siezed my sanding block and its chewed up.
Had some Jeep stuff to work on. I can't afford anything else breaking, I'm going to pilot the couch and watch the NFL network all day.
IntrepidXJ
NAXJA Member #647
- Location
- Grand Junction, CO
Haleyes said:Plan is to do absolutely nothing all day, so far I'm right on track.
x2
goodburbon
NAXJA Forum User
- Location
- Westcliffe Colorado.
Working on a friends wj for him. Brakes done after a complete system flush, because I accidentally grabbed the bottle of power steering fluid instead of DOT3.
Rear axle seal a no-go. Smashed my thumb trying toget the axle out, apparently it is a c-clip rear.
Trans fluid a no go for now, have to remove pan to drain fluid.
Overall that thing is a way better design (at least on the front end) than the xj. Dual piston calipers, Boxed control arms, crossover steering, large diameter tie rod, anti sway bar is further away from the spring as is the shock mount. Only downside is that front Low pinion axle and WTF is that front driveshaft? CV joints full of fluid at both ends flanged to the T-case and Pinoin?
Rear axle seal a no-go. Smashed my thumb trying toget the axle out, apparently it is a c-clip rear.
Trans fluid a no go for now, have to remove pan to drain fluid.
Overall that thing is a way better design (at least on the front end) than the xj. Dual piston calipers, Boxed control arms, crossover steering, large diameter tie rod, anti sway bar is further away from the spring as is the shock mount. Only downside is that front Low pinion axle and WTF is that front driveshaft? CV joints full of fluid at both ends flanged to the T-case and Pinoin?
- Location
- Southwest IN
Looks like a lot of work, have fun! What's the project vehicle?
I got the T-Max swapped over to the new XJ today with a little help from my oldest:
I got the T-Max swapped over to the new XJ today with a little help from my oldest:
- Location
- Southwest IN
Sweet. Buddy of mine is rebuilding a Willys in a kind of backwards way; redoing all of the Willys sheetmetal on the tub and dropping it on a 4WD Toyota pickup chassis, motor and all. Not how I would do it, but it'll be cool when it's done.
hey fawkers.
maine was cool
I'll post pictures and video later.
rode in a waco
http://acadiaairtours.com/aircraft.html
maine was cool
I'll post pictures and video later.
rode in a waco
http://acadiaairtours.com/aircraft.html
