- Location
- Hillsboro Oregon
Por-15 seems to be the most referenced- but I also see requires prep and/or rust to adhere to
Frame Crack? and options
- Thread starter Wraith40k
- Start date
Black1990jeep
NAXJA Forum User
- Location
- california
DP two part primer is very good.
avoid thick undercoats which can lift and hence trap wayer, and conceal rust growth under the undercoatings thick textured surface.
avoid thick undercoats which can lift and hence trap wayer, and conceal rust growth under the undercoatings thick textured surface.
- Location
- Hillsboro Oregon
Ok! All the parts are installed and my baby is back! Had to weld on the rock sliders after adding the frame stiffeners... and build a new sway bar bracket/spacer to make space for the BEEFY Boostwerks 'ultimate steering brace'. Everything was then etched/painted with 2 coats of Por-15 (1 can goes a long way!).
Thank you all for your help throughout. Will take a couple of pictures once it stops raining here in pdx... hahah... it won't stop
Thank you all for your help throughout. Will take a couple of pictures once it stops raining here in pdx... hahah... it won't stop
