Crossover steering and swaybars

[Dingo509]

I hope this fits here. I have a Crossover steering that i buillt using an arm from Dynatrac (i've learned about there prices since too) anyway the draglink runs right thru where the swaybar endlink used to mount. This is a Dana 44 with the brackets all moved up 2" BTW. So i have to move the passenger side mount up to clear the steering but i have adjustable endlinks so can i get away with running one side about 4" higher than the other side? I can move the drivers side if i need to but it works where it's at and im lazy.

Dingo

 

[JeepFreak21]

I hope this fits here. I have a Crossover steering that i buillt using an arm from Dynatrac (i've learned about there prices since too) anyway the draglink runs right thru where the swaybar endlink used to mount. This is a Dana 44 with the brackets all moved up 2" BTW. So i have to move the passenger side mount up to clear the steering but i have adjustable endlinks so can i get away with running one side about 4" higher than the other side? I can move the drivers side if i need to but it works where it's at and im lazy.

Dingo

I don't see any problem with that.
Billy


PS - When was this forum's grand opening?

 

[Dingo509]

I don't see any problem with that.
Billy

That's what i was hoping to here

PS - When was this forum's grand opening?

Must of been sometime today. the 21st

Dingo

 

[Goatman]

This is a Dana 44 with the brackets all moved up 2" BTW. So i have to move the passenger side mount up to clear the steering but i have adjustable endlinks so can i get away with running one side about 4" higher than the other side? I can move the drivers side if i need to but it works where it's at and im lazy.

Dingo

You mean something like this:

I don't see a problem with it.

 

[Dingo509]

You mean something like this:

I don't see a problem with it.

Exactly, Thanks

BTW do you have any pics of the trackbar bracket on the axle? that's something else i need to do soon.

Dingo

 

[Goatman]

Exactly, Thanks

BTW do you have any pics of the trackbar bracket on the axle? that's something else i need to do soon.

Dingo

Sure. All my brackets are made out of 3x3 boxed tubing, 3/16 wall, which gives you the 2 5/8 ID that is needed for all the suspension joints.

 

[Dingo509]

Thanks, that will help me out alot.

Dingo

 

[Jeff 98XJ WI]

Hey Richard, are you running NO bump stops in those pictures? I thought you used to have a stack of extensions in there. Jeff

 

[Goatman]

Hey Richard, are you running NO bump stops in those pictures? I thought you used to have a stack of extensions in there. Jeff

In those pics there are no extended bumpstops, but I did put them in later.