rredalty
NAXJA Forum User
- Location
- Lenoir City, TN
Few of you have seen the MJ I have but with things going the way they are, I am needing something I can drive to the trail if need be instead of always towing. Before I list anything about it, I will say I'm looking for a mild to well built 33" or 35" tire driver XJ/MJ or no less than $6000 CASH. I will not budge on the price so don't even waste your time but might be willing to travel some depending on what you got. This vehicle does have a title but is in no way daily drivable, that includes to the trail. Please don't ask me about it on the street at all. You will need a trailor. Title in hand but not registered. the vin plate is still in the vehicle. and the winch is no longer on there.
MJ is an '88, 4.0l, AW4, 231, long bed
-D44 front/ alloys/ lockrite/ warn hubs/ 5.13 yukons/ GreatLakeOffroad cover
-D44 rear/ spool/ traction bar/ 5.13 yukons
-Full hydraulic steering using single ended ram mounted to 1.5" .375" 4140 tie rod
-38.5x14.5x15 TSL SX's on 35 bolt DIY beadlocks
-front 3-link with 18" FOA reservoir coilovers
-sheet metal dash with all autometer guages
-cage/ front tube
-RCI buckets and harnesses
-bobbed/ boattailed/ boatsides...lots more I'm forgetting.
These pics were the last time out before the tube work/ coilovers
_________________
This is the tubing work sans the coilovers. The sheetmetal is not on the front but all is included. Don't have any pics on there with the coilovers but I will get some in the next few days.
_________________
MJ is an '88, 4.0l, AW4, 231, long bed
-D44 front/ alloys/ lockrite/ warn hubs/ 5.13 yukons/ GreatLakeOffroad cover
-D44 rear/ spool/ traction bar/ 5.13 yukons
-Full hydraulic steering using single ended ram mounted to 1.5" .375" 4140 tie rod
-38.5x14.5x15 TSL SX's on 35 bolt DIY beadlocks
-front 3-link with 18" FOA reservoir coilovers
-sheet metal dash with all autometer guages
-cage/ front tube
-RCI buckets and harnesses
-bobbed/ boattailed/ boatsides...lots more I'm forgetting.
These pics were the last time out before the tube work/ coilovers
_________________
This is the tubing work sans the coilovers. The sheetmetal is not on the front but all is included. Don't have any pics on there with the coilovers but I will get some in the next few days.
_________________