2 ZJ Rear Rotors, D44 Drums, 2 Drive Shafts

[verrive]

I have 2 ZJ rotors that are unused, the only difference is the center hole is slightly enlarged. I'm looking for $20 plus shipping.

I have a set of D44 drums with e-brake cables. to knowledge all the parts are there but it's not 100% assembled. $50 + shipping

I have two drive shafts, one measures approx 30" from end to end, has a pre 96 slip yoke end from a NP242. Has a fresh u-joint on the slip yoke end, looking for say $30 + shipping.

The other measures approx 31.5" end to end, I think I'm missing the caps so you'd need new u-joints, comes with a not attached 97+ slip yoke off who knows what, could count the splines if interested. $20 + shipping

 

[wannabe]

Are the ZJ's enlarged for installing on a D44. Put me in line if so.

 

[verrive]

Yeah, I had to enlarge the center hole maybe a 1/16" of a inch? something tiny like that to get them to fit over the center of my D44 shaft, I was gonna use them in a disc conversion but ended up using some different rotors.

- Kevin

 

[SeattleXJ]

I'll take the front Drive shaft if you still have it. In in WA so maybe we won;t need to ship it. I'll PM you.

 

[wannabe]

Not to pick your brain but that would be my plan for them. What else would I need, just calipers and ebrake cables? How big of a PITA is this set up? Why didnt you use them? What other system are you using?

 

[verrive]

I ended up going the crown vic route. I was told this would work for that but they didn't, and since I had all the other parts, I wasn't gonna start a ZJ swap although these should work fine if you're using ZJ brakes.

- Kevin