sintax
NAXJA Forum User
- Location
- Corona, CA
Kinda starting to phase out of the jeep world. this is the 3rd revision of the jeep and just dont have the love for it i used to. Here are the rough specs for right now. Pics to follow once i pull them off of my camera.
89xj 4 door
36x13.5x17 IROKs on standard H2 wheels
High Pinon Ford F250 Dana 44 front axle full length
alloy shafts + CTM Joints
ARB w/ 5.13 gears
High steer setup w/ full hydro
new bearings and ball joints
warn prem lockouts
spare complete shafts and joints
all new brake parts w/ dual piston calipers
Eaton h072 rear axle
5.13 gears, eaton detriot
spare complete 4.10 rear diff has new bearings
spare shafts and diff cover
other assorted eaton bearings and seals as well.
14 bolt disk brake conversion
14" travel fox coilovers w/ res up front
fully braced hoops and reinforced unibody
3 link wishbone
mid length lowers
5" leafs in the rear + shackles
Tried to keep it as low as possible, sits only a little higher then RE 5.5 XD kit that used to be on it.
4.0 w/ aw4 ( 4.0 has got some miles but still strong)
currently running 231 w/ HD SYE and high angle rear shaft
have spare Dana 300 along with spare 23 spline AW4 transmission
210 york for OBA
This really aint a street jeep, It needs to be on the trail.
Its located in Corona Ca.
Looking for 6k
will consider trade for shovelhead harley
I have pictures from the whole build process as well.
89xj 4 door
36x13.5x17 IROKs on standard H2 wheels
High Pinon Ford F250 Dana 44 front axle full length
alloy shafts + CTM Joints
ARB w/ 5.13 gears
High steer setup w/ full hydro
new bearings and ball joints
warn prem lockouts
spare complete shafts and joints
all new brake parts w/ dual piston calipers
Eaton h072 rear axle
5.13 gears, eaton detriot
spare complete 4.10 rear diff has new bearings
spare shafts and diff cover
other assorted eaton bearings and seals as well.
14 bolt disk brake conversion
14" travel fox coilovers w/ res up front
fully braced hoops and reinforced unibody
3 link wishbone
mid length lowers
5" leafs in the rear + shackles
Tried to keep it as low as possible, sits only a little higher then RE 5.5 XD kit that used to be on it.
4.0 w/ aw4 ( 4.0 has got some miles but still strong)
currently running 231 w/ HD SYE and high angle rear shaft
have spare Dana 300 along with spare 23 spline AW4 transmission
210 york for OBA
This really aint a street jeep, It needs to be on the trail.
Its located in Corona Ca.
Looking for 6k
will consider trade for shovelhead harley
I have pictures from the whole build process as well.