XJ Part Out before it Begins

[xjbump]

I had planned on putting together another XJ but it won't be happening anytime soon, so instead of still holding on to this stuff I'm unloading it. I will try to get pics ASAP. Almost everything is new in the box or barely used and in like new condition. PM any questions or thoughts, prices are pretty firm for now as I don't need this stuff gone but if you buy a lot we'll see.

Mega Package $1800 for everything, save a grand+.

Front Winch Bumper - New - $250 Homemade - beefy - test mounted
Rear Bumper w/rec. input, d-ring tabs & bottle opener $150 Homemade - beefy - no marks wasn't on long
Rusty's T-case Skid (New) & HD xmember (used but no marks) $100 ($220 New)
JKS Discos - New - $100 ($163 New)
C-Rok Inside Steering Box Brace w/grade 8 bolts - used - $20 ($40 New)
RE Tracbar & HD bracket - used - $125 ($245 New)
Daystar? 2" Coil Spacers(red) - measure 1 7/8 - used - $20
4whel Customs 2.25" Coil Spacers(black) -measure 2 1/4" - New - $25
Drop Pitman Arm - unsure brand or drop - Like new - $10

RE Upper Adj. Arms #3780 - New - $180 ($240 New)
RE Lower Fixed Arms #3700 - New - $160 ($210 New)
RE Drop Brackets #9900 - New - $220 ($270 New)
Package Deal for Arms & Brkts $500


5 - 33" Truxxus MTs 12.5x15" - Lots of tread - a month on the road and a half day at RC- They are mounted on 5 on 5.5" steel rims - spare is brand new never used - $550
4 - Wheel Spacers that go from 5 on 4.5 to 5 on 5.5 $100
4 - Brand New Black Steel Wheel 5 on 4.5" $150

If someone wants I can split the tires/rims up. I can also mount and balance. I can swap the 4.5 rims for the 5.5.

Axles as a package: A 99' D30 4.10s w/Tru-Trac and brand new unpainted RuffStuff diff. cover and a 95' 8.8 4.10s w/Trac-Loc currently stripped with the RuffStuff kit and diff. cover waiting. I can also weld this up for an additional fee. $600 for the pr.

Pics to come.

Front bumper was mounted for a day and the rear was on a DD for a month or 2, no marks.

 

[5spd_xj]

I wish the Truxus were 35s...

Great deals on all of this. Good luck getting rid of it all, and Good luck getting the buggy done!! :thumbup:

for any newbies to the site, Jim is awesome awesome (yeah, double awesome) and is a great guy to deal with. Buy with confidence so you can get some sweet parts on your rig and he can get some cash and get back to wheelin again!

 

[kastein]

What size are those wheels? 15xsomething I assume? If by some freak chance they are 16x7 (or 8) with approx 4 inches backspacing, consider them sold!

EDIT: further, wow! Wish I'd waited a month or two to start getting parts together for my 4.10s + 8.8 swap, lol

 

[5spd_xj]

says the truxus are 33x12.50x15s mounted on 5 on 5.5 wheels but he can swap em for the 5 on 4.5 wheels... so yep. 15s

 

[kastein]

That's what I was afraid of. Ah well :eyes:

 

[cjsxj87]

I want the winch bumper. Can you get me some better pics of it? Tied into frame rails?

 

[xjbump]

Brackets are pretty basic, I made them last minute to get it on the MJ but never used it. The pass. side goes back a bit and the drivers I cut before the steering bolts. I have a piece I was going to use as a steer. box reinforcement welded to the bracket. I'll try and get some pics.

 

[themangeraaad]

Interested in the bumpers. Got any pics? (there may be pics up right now that my work internet blocked... let me know if there is and I will log in from my cell to take a look).

Edit: Damnit, someone already beat me to front bumper! Well still interested in the rear bumper. I assume it has all the necessary uni-body tie in's so it's solid for recovery? If cjsxj87 doesn't take the front bumper I may still be interested in that as well.

Edit2: Also possibly interested in trackbar/bracket

 

[markjrs3]

goddd. need/want axles. if they're still avail after christmas i'll hit you up

 

[Dest]

goddd. need/want axles. if they're still avail after christmas i'll hit you up

Interested if available after Christmas as well.

 

[Senior_XJ]

Put me in line for the front bumper,, are u selling the winch as well??
Ur askin $250 for it, correct! Quick Question, u mentioned "home built" BUT that front bumper does NOT look home made!! OR did u mean the rear bumper?? Do ya have any pics of it on ur jeep??
Thanks,
SeniorXJ

Brackets are pretty basic, I made them last minute to get it on the MJ but never used it. The pass. side goes back a bit and the drivers I cut before the steering bolts. I have a piece I was going to use as a steer. box reinforcement welded to the bracket. I'll try and get some pics.

 

[xjbump]

Winch is on my other Jeep. Both bumper I built. Front was done at a friends shop and the rear I did at home. The only pics of the front bumper on a vehicle is thte ones above. They were taken 3 months ago when I put in on and off the MJ, the same day. I'll try and get some of just the bumper. The rear pics are new as it sits. I've had these bumpers sitting in my basement for a couple years waiting for an XJ to put them on unfortunately its not going to be mine. The rear was only on a DD for a month and has sat waiting for about 3yrs to be put back on. No rust on them but do need to be coated with some form of protection. Front bumper just has one layer of black primer I put on it before I mounted it. Rear has a coating of black guard on it but has some nicks from being moved around.

 

[BillDunn83]

i am very interested in the xmember and skid... do you think it is possible to ship? and if you are willing to take the tru-trac out of the 30 I would take that too. zip 19335

 

[Hammered]

C-Rok Inside Steering Box Brace w/grade 8 bolts - used - $20

PM sent

 

[cjsxj87]

Yeah, id liek some more picks of the front bumper.

 

[xjbump]

i am very interested in the xmember and skid... do you think it is possible to ship? and if you are willing to take the tru-trac out of the 30 I would take that too. zip 19335

I'll ship anything on anybodies dime. I've shipped D60's, a comp. 460, & other crap. I have 1 other person interested in them, I'll check with them and if not I'll get some weights. As far as the Tru trac I dont wont to pull apart, if it doesnt sell I'll keep it. I do have a friend who has one for sale $175b.o. I believe.


PM Sent back Hammered.

Pics on the Front Bumper tomorrow after work. Unfortunately its not easy to get to in my basement as of right now there are 5 projects full of parts down there including all the body panel from a 78 F250 painted.

 

[mini=man]

Would you want to separate the tires from wheels? If so I' be interested but I don't want 1-tons or to run spacers.
Edit: is it still $550 on the 5x4.5 wheels? If it is can I see a picture of them? I'm VERY interested.

 

[xjbump]

Here are some pics of the front bumper:

Would you want to separate the tires from wheels? If so I' be interested but I don't want 1-tons or to run spacers.
Edit: is it still $550 on the 5x4.5 wheels? If it is can I see a picture of them? I'm VERY interested.

Price with 5 on 4.5" rims is $600. Rims are black AR767's, new never used. I dont have a fifth rim, either just the tire or I could throw a factory steel rim on it.

Heres some pics of the tires and rims(5.5") and the bottom pic is the 5 on 4.5 set:

 

[billyjp2]

nick didnt say anything about wanting those tires??? Thats a steal.

That bumper is beautiful

 

[xjbump]

Sux to see the bumper go after so long. Nick might want bigger then 33s, he also might not know..