WTB: Rear Axle for XJ

Johnnie Walker

Piece of Fish!
NAXJA Member
Location
WA state
8.25 (27 or 29-spl, doesnt matter), D44.. whatever. I guess anything that will bolt in. Complete and decent brakes if possible. I have stock 3.55s so would like to stay there for now so I can use my 4wd
Think my Turdy5 is going out.
Cheaper the better.
 
I have a 27 spline 8.25, gears are worn.
Also have backing plates, calipers, rotors to convert to rear disc set-up; additionally a factory limited slip carrier, 29 spline axles and if you want to upgrade I have new in the box 4.10R&P plus install kit sitting on the shelf.

How about $300 for all of it.
 
Tempting, I have a few offers to go through and need to figure out how much money I have to spend.
 
I know you said 8.25 or 44 but if you need soemthing quick, I have a D35 with brakes and leafs still attached if you want it - come and get it :-)
 
I know you said 8.25 or 44 but if you need soemthing quick, I have a D35 with brakes and leafs still attached if you want it - come and get it :-)
3.55s, complete, lsd (not necessary but helpful)? Help me install it? Be up in your area in Jan sometime.
 
I know you said 8.25 or 44 but if you need soemthing quick, I have a D35 with brakes and leafs still attached if you want it - come and get it :-)

Mark, If Johnnie Walker doesn't want the leafs please let me know I need a set to place under a hulk.
 
You can have the leafs, I have bastard packs to install. (=
Alright, Mark.. I will let you know when I'll be up there.
 
Much appreciation. you have PM. (=
 
Back
Top