JDComptonXJ
NAXJA Forum User
- Location
- Rocky Mount, VA
I'm gonna use 7/16 or 3/8" attatched to the three bumper holes (already have c4x4 tow hooks) for the frame mounts. My question is, would it be strong enough to weld two pieces of 1.5" x 3/16" or 1/4" square tubing between the two and bolt the winch plate to those with 4-6 grade 8's? Or should I weld the winch plate to the square tubing. I'd like to be able to take the winch off.
Then planning on running 2" .120 DOM under the header panel and back under the fender then bracing with some 1". Kinda like the TruckFarm bumpers.
Then planning on running 2" .120 DOM under the header panel and back under the fender then bracing with some 1". Kinda like the TruckFarm bumpers.