David Taylor
NAXJA Member #570
- Location
- San Marcos, Ca
Does that go below the frame rails ? How much ground clearance do you give up to run that? How about the brake over angle with the front arms down there ?
What real Men do with Sawzall's
- Thread starter AZXJ
- Start date
vintagespeed
NAXJA Forum User
- Location
- Upland, CA
I really like the subframe, that was an idea that I had also. I do kind of wonder about the rear coil positions, why not just run coilovers?
ashmanjeepxj
NAXJA Forum User
- Location
- Vail AZ, Jimmy's Cherokee Buggy
AZXJ said:110 inch wheel base and 39 inch IROK's...
Another built cherokee in arizona?
Where do you wheel.
39s on a d44...
cccj
NAXJA Forum User
- Location
- Daleville, AL
I want to know more about this...
39s on a d44...
What has it had to hold up to so far?!?
Economos
NAXJA Forum User
- Location
- Coastal NC
Body work looks great and so does that subframe. Any idea of maybe... just maybe C-Rok would add that sucker to the product line?
Thoes were just some teaser shot guys. Relax... RCP!! Dude we go way back... What up... ?? Anyways,
This rig is Theon's, my buddy. He owns Cherokee4x4.com if you have any questions about the build up your gonna have to ask him. All I did was chop the bastid cuz I LOVE SAWZALLIN!!!!!!!!
As for the bondo. Well he was trying to make it to moab for the big event.. We were in a hurry....... And for a first time hack job by a bunch of hillbillies, it looks kinda perdy...
Oh and by the way, Just because I don't post around here every damn day doesn't mean I am a newb!!! I 've been around
for quite a few years.. I have just been busy with my club ArizonaXJ...
We are working out the brake issues and it should see a trail Friday or Saturday. Woodpecker or AJAX for a test run. It's getting exhaust today... Maybe you'll see some new picts after the run.. Maybe not...
Later
This rig is Theon's, my buddy. He owns Cherokee4x4.com if you have any questions about the build up your gonna have to ask him. All I did was chop the bastid cuz I LOVE SAWZALLIN!!!!!!!!
As for the bondo. Well he was trying to make it to moab for the big event.. We were in a hurry....... And for a first time hack job by a bunch of hillbillies, it looks kinda perdy...
Oh and by the way, Just because I don't post around here every damn day doesn't mean I am a newb!!! I 've been around
for quite a few years.. I have just been busy with my club ArizonaXJ... We are working out the brake issues and it should see a trail Friday or Saturday. Woodpecker or AJAX for a test run. It's getting exhaust today... Maybe you'll see some new picts after the run.. Maybe not...
Later
ashmanjeepxj
NAXJA Forum User
- Location
- Vail AZ, Jimmy's Cherokee Buggy
AZXJ said:
club?
So whats different from your your club and the AZVJC ?
I like our wheelingarizona.com club, we have a buliten board, and do trail runs for all trucks. It alot o fun watching rock turn a full size into a mid size
have fun.
Newbie.
Whatsup men.......Dave....j/k Most members in ArizonaXJ are also part of AZVJC, we sometimes just like to go out with XJ's I hate showing up those TJ's when I'm the only XJ. Anywho, tomorrow is the day to test his junk out. Maybe we'll provide some action shots, maybe not!
P.S. not a noob either:moon:
I hate showing up those TJ's when I'm the only XJ. Anywho, tomorrow is the day to test his junk out. Maybe we'll provide some action shots, maybe not! P.S. not a noob either:moon:
AZVJC has pinched a nerve on the side of my neck 
, and to release the presure, I dropped them twice. There is way too much bickering going on in that group, and if you arn't god, then you aint chit. AZXJ has been the best group I have found, and am very happy there. The poeple are a bit more polite and any discussion goes, i.e. i stubed my toe in middle of night to answer phone. If it wasn't Joe West calling to tell me he saw my jeep driving down the road with someone else driving it, then the whole world would come crashing down on me. I can post pics like this wrecked jeep on AZXJ, and the group will try to find better pics to out do me. AZVJC would chew my ass up one side of the road, and back down the other about 12-13 times. FAWK AZVJC remember Rodeo-Chidiski fire, and how many jeeps went out with supplies (113 and one bronco which was Mitch Woodword), and then when MT Lemon went into flames and I tried to help that out. AZXJ wanted to help and wanted info, AZVJC said to hell with them, they are a bunch of rich folks that don't need shit. I am up there helping out with the clean up, and building 4 new houses, with maybe 2 more to come. 3 houses down is an old man that had his hole life on that mountain, with no insurence, and now has nothing. I could go on, but why?
, and to release the presure, I dropped them twice. There is way too much bickering going on in that group, and if you arn't god, then you aint chit. AZXJ has been the best group I have found, and am very happy there. The poeple are a bit more polite and any discussion goes, i.e. i stubed my toe in middle of night to answer phone. If it wasn't Joe West calling to tell me he saw my jeep driving down the road with someone else driving it, then the whole world would come crashing down on me. I can post pics like this wrecked jeep on AZXJ, and the group will try to find better pics to out do me. AZVJC would chew my ass up one side of the road, and back down the other about 12-13 times. FAWK AZVJC remember Rodeo-Chidiski fire, and how many jeeps went out with supplies (113 and one bronco which was Mitch Woodword), and then when MT Lemon went into flames and I tried to help that out. AZXJ wanted to help and wanted info, AZVJC said to hell with them, they are a bunch of rich folks that don't need shit. I am up there helping out with the clean up, and building 4 new houses, with maybe 2 more to come. 3 houses down is an old man that had his hole life on that mountain, with no insurence, and now has nothing. I could go on, but why?ashmanjeepxj
NAXJA Forum User
- Location
- Vail AZ, Jimmy's Cherokee Buggy
AZXJ might reduce the stock rubicon factor...
What about a F350 M-XJ
Ill have to go out with you guys some time, The cage and finish work takes time.. but sometime.
What about a F350 M-XJ
Ill have to go out with you guys some time, The cage and finish work takes time.. but sometime.
CREEPRS
NAXJA Forum User
- Location
- Mesa, Arizona
I guess it is about time, I start posting about my rig. I want to thank WARN, Randy's Ring and Pinion, Interco Tire, AGR, Currie Enterprises, Dick's Driveline in Phoenix, Dave, Leonard, and Jeff from Arizona XJ, Greg from C-ROK, and everyone else that made this Rig possible, without all of your help, It would have taken forever to finish.
The first frame design was done by Greg Gavel from CROK E&F, that was used on CROK, Greg as well as others helped in the design phase of this project. My company, Cherokee 4x4 did all the fab work.
Although the frame is different from CROK, the concept came for it and with the permission from CROK E&F, Cherokee 4X4 will be producing the frame as a bolt on kit for the XJ. You will have an option of the type of suspension you would like (Coils, Leafs, Coil Overs, etc). If anyone wants more info on it, you can contact me at [email protected].
OK enough of the promo stuff.
I started the project Sept 2002, and finished Oct 2003, by late July the project was only 75% complete, that is when WARN, Randy's Ring and Pinion, Currie, Dick's Driveline, AGR, and Interco stepped up to the plate and offered to sponser my project.
I still have a few mods to do, like more fender trimming, and limiting straps, if anyone would like to check it out in person I will be attending the 2003 ASA4WDC Jeep Jamboree in Florance, Az Oct 17-19, I will be there the 18th and 19th.
BTW- YES this thing does see all kinds of rock, I guess, but I dont sitting in the drivers seat.
The first frame design was done by Greg Gavel from CROK E&F, that was used on CROK, Greg as well as others helped in the design phase of this project. My company, Cherokee 4x4 did all the fab work.
Although the frame is different from CROK, the concept came for it and with the permission from CROK E&F, Cherokee 4X4 will be producing the frame as a bolt on kit for the XJ. You will have an option of the type of suspension you would like (Coils, Leafs, Coil Overs, etc). If anyone wants more info on it, you can contact me at [email protected].
OK enough of the promo stuff.
I started the project Sept 2002, and finished Oct 2003, by late July the project was only 75% complete, that is when WARN, Randy's Ring and Pinion, Currie, Dick's Driveline, AGR, and Interco stepped up to the plate and offered to sponser my project.
I still have a few mods to do, like more fender trimming, and limiting straps, if anyone would like to check it out in person I will be attending the 2003 ASA4WDC Jeep Jamboree in Florance, Az Oct 17-19, I will be there the 18th and 19th.
BTW- YES this thing does see all kinds of rock, I guess, but I dont sitting in the drivers seat.
ashmanjeepxj
NAXJA Forum User
- Location
- Vail AZ, Jimmy's Cherokee Buggy
CREEPRS said:
Thats this Friday and saturday, I have friday off but i really need to finish cleaning my garage... I will not wheel my cherokee till i build the cage.
Where in Florance?
crimsonride
NAXJA Forum User
- Location
- Murray Utah, Florida
I see you got some new pictures up, it looks nice. Wish I were in AZ.
