ruger81
NAXJA Forum User
- Location
- Battle Ground WA
Errrrr
/Jealous
I need the 4.1. Just been lookin. Might wait to see if 4:88's and 33's are good enough
What did you do to your XJ today
- Thread starter Cherokeefever
- Start date
I need the 4.1. Just been lookin. Might wait to see if 4:88's and 33's are good enough
dellstopjeep
NAXJA Forum User
- Location
- KUNA, ID
4:1 is overrated. I would ditch mine in a second. Cant use 4th and 5th. Noisy, thats it, im burning my transfer case at nwfest.
ruger81
NAXJA Forum User
- Location
- Battle Ground WA
All by it!
FiveNdime
NAXJA Forum User
- Location
- Washington
UPS man came today party1:
Also, there is a 4x4 show in Woodland Washington this Sunday. Last year it was from 9am till 3pm. Raffle prizes, RTI ramp, Balance beam (super hard to do) and a good time. Also a Hot Rod car show just blocks away. The 4x4 show is right near the Horseshoe Lake Park on the North side in the big grass field. You can see it from the free way.
Also, there is a 4x4 show in Woodland Washington this Sunday. Last year it was from 9am till 3pm. Raffle prizes, RTI ramp, Balance beam (super hard to do) and a good time. Also a Hot Rod car show just blocks away. The 4x4 show is right near the Horseshoe Lake Park on the North side in the big grass field. You can see it from the free way.
Monster Mopar
NAXJA Forum User
- Location
- Moses Lake, WA
I'm in the process of setting up the gears and air locker in my dana 44 right now.
- Location
- NE Texas
bought a bottle of fireball for NWF..
yeah.. it's for my XJ!
yeah.. it's for my XJ!
- Location
- Vancouver, WA
It's Kinda a long story... And you don't wanna know anyway, it will just make you upset.
ruger81
NAXJA Forum User
- Location
- Battle Ground WA
Lol.... im gonna get the 4.1 one of these days just going to wait till I see how low 4:88's and 33's are I think
- Location
- Vancouver, WA
I'm happy with 35s and 4.56s
But I have a REALLY strong motor and trans. With the way it was before I thought it was geard (3.55s and 35s)
AwesomeXJ
NAXJA Forum User
- Location
- Vancouver WA.
discovered the u-joint on my rear drive shaft at the pinion was toast. so i changed it
....
I also learned a valuable lesson...... WEAR GLOVES WHEN USING AN ANGLE GRINDER!!!!!
....
....Took an 1/8in wide and 1/8in deep gouge out of my thumb. :tears::gee:
....
I also learned a valuable lesson...... WEAR GLOVES WHEN USING AN ANGLE GRINDER!!!!!
....
....Took an 1/8in wide and 1/8in deep gouge out of my thumb. :tears::gee:
Monster Mopar
NAXJA Forum User
- Location
- Moses Lake, WA
Oh man I've gotten f*cked up from angle grinders in the past. The best thing about angle grinder cuts though (at least all the ones I've had) they don't bleed because usually the disk it so hot it just cauterizes as it cuts :scottm:
AwesomeXJ
NAXJA Forum User
- Location
- Vancouver WA.
oh.. man mine bled like a fish. I instantly dropped the grinder and it took off down the driveway and by the time I could grab my fist aid kit had blood everywhere. when beth got home she said it looked like i sacrificed a goat in the driveway.
muddypunk
TOOL
- Location
- Coupeville Whidbey Island washington
Damn My chopped the tip about 1/2 inch or so and it did not bleed at all As Monster Mopar said
NON XJ I went and picked up my case 350 bull dozer so I cant start on selective clearing our 5 acre's YEAH and build my obstalce course :greensmok
NON XJ I went and picked up my case 350 bull dozer so I cant start on selective clearing our 5 acre's YEAH and build my obstalce course :greensmok
Last edited:
olysteve
NAXJA Forum User
- Location
- Federal Way Washington
I've lost chunks off my knuckles from an angle grinder but not finger tips.
That's the kind of thing that leads to the invention of new cuss words.
That's the kind of thing that leads to the invention of new cuss words.
ECKSJAY
Water is dirty
- Location
- Covington, WA
I rocked mine about a month ago. It actually didn't hurt until the needle went in to numb it. :roll:
discovered the u-joint on my rear drive shaft at the pinion was toast. so i changed it
....
I also learned a valuable lesson...... WEAR GLOVES WHEN USING AN ANGLE GRINDER!!!!!
....
....Took an 1/8in wide and 1/8in deep gouge out of my thumb. :tears::gee:
While I didn't do anything to the XJ today since it decided to rain ALL day, I did check out the Timber Madness sale at the Danner Factory store. Picked up a new pair of kicks for a killer price!
My "old" Danner's are going on 8+ years old, and are still in great shape. It pays to buy USA made.
My "old" Danner's are going on 8+ years old, and are still in great shape. It pays to buy USA made.
ruger81
NAXJA Forum User
- Location
- Battle Ground WA
X's 2
My "old" Danner's are going on 8+ years old, and are still in great shape. It pays to buy USA made.[/QUOTE]
My "old" Danner's are going on 8+ years old, and are still in great shape. It pays to buy USA made.
[/QUOTE]
Sideshow
NAXJA Forum User
- Location
- Lynnwood, Wa
I cut this out:
So this would fit under the seat:
So this would fit under the seat:
McJesse
NAXJA Forum User
- Location
- Battle Ground/WA
BECAME A MEMBER! finally
but besides that i put 2 front rock lights on my xj and i'm putting another 2 in the rear. i also put 4 lights on the top from the other day but here's a pic....
http://s972.photobucket.com/albums/...18712984_100001375224724_403617_4624871_n.jpg
hopefully that works
can't wait for NWF gonna be a fun time
but besides that i put 2 front rock lights on my xj and i'm putting another 2 in the rear. i also put 4 lights on the top from the other day but here's a pic....
http://s972.photobucket.com/albums/...18712984_100001375224724_403617_4624871_n.jpg
hopefully that works
can't wait for NWF gonna be a fun time
homebrew
NAXJA Forum User
- Location
- Bremerton, WA
Got my RMS swapped out. no leaks during my 10 min run and rev. Fingers crossed that none develop. Was pleasantly surprised by how "clean" the inside of my engine was, it had no sludge in it at all. I've been running royal purple in it, which is said to help clean up your engine, but with 218k on the clock I wouldn't be surprised if it had been gone through at some point in the past cause it runs like a champ. Next is tube seals and axle bushings.
