WF Swap Meet

[RedHeep]

Set of skyjacker 8" coils. Make an offer.

Front bumper is spoken for.

Winch/rope is up for grabs, but I think bmyohn is in the lead.

Short side d30 axle shaft, probably needs a new u-joint.

Set of stock 8.8 axles ('98 explorer with discs).

 

[96 XJ Sport]

Set of stock 8.8 axles ('98 explorer with discs).

What gears are in the 8.8s? I have a buddy who might be interested for his '68 Mustang.

 

[BOB]

What gears are in the 8.8s? I have a buddy who might be interested for his '68 Mustang.

I may be interested too....what size gears???
(PM me the gears and asking prices Matt)


BOB

 

[XJ&CHZ4ME]

OK, I may have a plethora of misc parts coming off a buddy XJ that he is parting due to mechanical failure and it is really a POS. It has some MT's that are a radial tire, something like Wildcat MT's or Auroa's or along those lines.

90% tread or better, mildly wheeled 33x12.50x15's for $350 OBO
1 set of front Rough Country 4.5" lift coils $75
1 set rear leaf packs w/ AAL installed for approx 3" lift Make Offer
shocks for 4.5" lift $??? (not sure of condition yet)
1 set of RE SF LCA's that were cut and lengthened for a taller lift $??
1 set of 1.5" coil lift spacers $25

All items are Winterfest delivery or shipped on your dime. PM me if interested in any of it. Items are subject to local sale if cash is not in hand.

 

[Fore Wheeler]

Dan would have to pay someone to take it then!

yea, were gonna leave it in it's original state, now if you want me to sign it, I will for an extra $5, or a beer. if you want it yellow, now that will cost you.

 

[FlexdXJ]

Here's what I have that i can bring. Rustys 242 skid($20), set of 97 country wheels($50), one pair 97+ tail lights($15, will work fine only slight cracking).

I will also accept trades so if you got something to get rid of and want something I have let me know what it is!

 

[RedHeep]

Winch rope is sold.

New winch price $400. You'll have to source someone getting rid of a cable for cheap.

 

[bmyohn]

Damn, i was gonna take the winch if it had the rope on it. I was hoping to put it on for WF. guess i can look around for rope

 

[XJRN]

Here's what I have that i can bring. Rustys 242 skid($20), set of 97 country wheels($50), one pair 97+ tail lights($15, will work fine only slight cracking).

I will also accept trades so if you got something to get rid of and want something I have let me know what it is!

Will the 242 skid fit a 231? If so I will take it.

 

[RedHeep]

Will the 242 skid fit a 231? If so I will take it.

The 242 skid hangs down an extra inch or two because it's bigger than a 231, otherwise they're the same.

 

[IllianaXJ]

Damn, i was gonna take the winch if it had the rope on it. I was hoping to put it on for WF. guess i can look around for rope

Have Ba-Riedo drop ship some rope to the Badlands. Masterpull all the way.

 

[bmyohn]

I've been PMing him tonight about some rope

 

[HaleYes]

Have Ba-Riedo drop ship some rope to the Badlands. Masterpull all the way.

That'd work.
You might call badlands and see what they want for some. Pretty sure they have it.

 

[bmyohn]

That wouldnt be too bad. He's got me looking at the Amsteel Blue line right now.

I really gotta finish making this website this weekend. If i do that i can afford the winch lol

 

[97XJ2]

Will the 242 skid fit a 231? If so I will take it.

I have a 231 skid on my 242, as long as the lowest point on the x-fer case doesn't sit lower than your crossmember you can run a 231 skid. For some reason my 242 sits high enough. Take a straight edge and place it on the crossmember to check for interference.

 

[HaleYes]

I have a 231 skid on my 242, as long as the lowest point on the x-fer case doesn't sit lower than your crossmember you can run a 231 skid. For some reason my 242 sits high enough. Take a straight edge and place it on the crossmember to check for interference.

I had a Rusty's on there and it was a 231 model. VERY CLOSE clearance between the skid and the TC. I coulnd't put my finger between the two.

 

[97XJ2]

I've got no less than 5/8", with the MORE mounts its not gonna be a problem

 

[FlexdXJ]

Will the 242 skid fit a 231? If so I will take it.

Dude, I completely forgot I am giving it to a buddy. I just realized it. Sorry.

 

[XJ&CHZ4ME]

Flex..do you give it to your buddy often?

 

[FlexdXJ]

Flex..do you give it to your buddy often?

All day man. All day! Giggity! :smoker: