WF Swap Meet

[99SJ_Ex]

I need some armor and a sye/shaft for my 99 with the 231 TC if anyone will be bringing anything.

Same here, buy the standard HD SYE off eby and then go to a salvage yard and pick up a front Drive shaft... much much cheaper to do it this way...

 

[GoSlowGetStuck]

Same here, buy the standard HD SYE off eby and then go to a salvage yard and pick up a front Drive shaft... much much cheaper to do it this way...

For what it's worth I will have an extra front shaft off of either an XJ or a ZJ, depending on which I use. I would expect them to be the same length but I haven't checked it.

I would have had an SYE for sale but I decided to keep it for myself.

 

[Comanchedude]

How much lift are those for?

From RE ( I used them at 6.5" lift no drop brkt.)

You can use it on anything from stock height to 4.5 lift as-is.If you
incorporate drop brackets and support braces you can go up to 5.5.The
range of adjustment is 15 3/4 inch to 17 1/2 (center of bolt to center
of bolt)

 

[FlexdXJ]

From RE ( I used them at 6.5" lift no drop brkt.)

You can use it on anything from stock height to 4.5 lift as-is.If you
incorporate drop brackets and support braces you can go up to 5.5.The
range of adjustment is 15 3/4 inch to 17 1/2 (center of bolt to center
of bolt)

90% sure I'll take em. Let me think on it for a little bit and I'll get back to you.

 

[Comanchedude]

Re: WF Swap Meet SOLD

SOLD THESE ON COMANCHECLUB

From RE ( I used them at 6.5" lift no drop brkt.)

You can use it on anything from stock height to 4.5 lift as-is.If you
incorporate drop brackets and support braces you can go up to 5.5.The
range of adjustment is 15 3/4 inch to 17 1/2 (center of bolt to center
of bolt)

 

[95' heep]

I may be parting out a complete 1995 XJ

I will keep the doors and rear axle but I will keep the engine/trans/t-case and front axle and hatch and glasses but will sell if anyone need them

its titled "1995 XJ" in the for sale section

 

[sgtmack]

I acquired a 2000 engine to start building a stroker. I don't need the external stuff, so I have a 99-01 intake, throttle body, coil pack, and injectors for sale. Make me an offer.

I also have a set of 3" front Rough Country coil springs. They were level and not sagged when I took them off to lift it higher. Make me an offer.

 

[97XJ2]

Any body need a Wilson 'Lil Wil? Was a really good magnet mount CB for me. Then I went hard mount. Let me know.

 

[85xjwoody]

Any body need a Wilson 'Lil Wil? Was a really good magnet mount CB for me. Then I went hard mount. Let me know.

CALL ME!!!!

 

[97XJ2]

Will do, after class, figure 11 ish.

 

[97XJ2]

Spoken for.

 

[jester1084]

I've got an extra D-44 front sitting around if anyone needs it. It's out of a late 70's (78-ish I think) F-250 so it's high pinion, thick tubes, welded on brackets. If interested pm me because I forget to check this thread much.

 

[Fore Wheeler]

got a Rusty's TC skid that I bought from Hale, got $60 into it, need to get $60 out of it, or trade. I love trades, jeep parts or your sister, let me know.

 

[poorboy87]

Aw4 out of running and driving jeep. I bought it thinking I needed a trans for my jeep.
Dont need it and its takeing up garage space ill never use it. No torque convertor $125

2 MJ taillights. decent shape. come with pigtails sockets and bulbs. $35
More to come if I can think of what all I have.

Trades considered

 

[HaleYes]

got a Rusty's TC skid that I bought from Hale, got $60 into it, need to get $60 out of it, or trade. I love trades, jeep parts or your sister, let me know.

FYI: I'm willing to autograph this if it would help Dan sell it.

 

[bmyohn]

Winterfest special

- Just the bumper $350

- Winch, fairlead, masterpull rope $600

I'll only go lower if you've been on a trail with me.

PM sent

 

[BIGSLVRXJ]

If they haven't sold yet, I will bring along my WJ front leather seats and XJ rear leather seat. Details and pics here...
http://www.naxja.org/forum/showthread.php?t=1024587

 

[Comanchedude]

2 MJ taillights. decent shape. come with pigtails sockets and bulbs. $35
More to come if I can think of what all I have.

Trades considered

I will take the tail lights. pm sent

 

[poorboy87]

I will take the tail lights. pm sent

PM replied.

Two sets of Stock XJ coils
One in rough shape $10
Good shape $20
4 Stock Shocks. The worked good. Old. Took them off to put on the lift. Free.

 

[XJosh95]

FYI: I'm willing to autograph this if it would help Dan sell it.

Dan would have to pay someone to take it then!